NXL1K1000 Videotec Large Housing for Aggressive Environments w/ Sunshield and Heater 110VAC/230VAC

The NXL housing, entirely constructed from AISI 316L electropolished stainless steel, has been designed to accommodate large cameras and zoom lenses.  The housing is conceived to operate in special environments such as salt water applications like marine or coast patrol, industrial or chemical applications, and where external agents are highly corrosive.  The housing offers the possibility to remove either the front or the back cover for adjusting the lens and various connections. 

A wide range of accessories is available: heater, camera power supply, NXWBL stainless steel wall bracket, and the VIPNXL wiper.  The NXL housing can be installed on NXPTH Pan & Tilt head, to obtain a complete positioning system.

• Made of AISI 316L electropolished stainless steel
• IP66/IP67
• Cylindrical body enclosed by two circular flanges, 12mm (0.47in) thick the front flange and 9mm (0.35in) thick the back flange
• 4 PG13,5 cable glands nickel-plated brass for external connections
• Available accessories: heater, camera power supply, wiper, washer pump

Specifications

GENERAL

• Constructed from electropolished stainless steel (austenitic alloy stainless steel, corrosion
  and heat resistant according to the following standards):
  
• AISI 316L
  
• UNI 6900-71: X 2 Cr Ni Mo 17 12 2
  
• DIN 17006: X 2 Cr Ni Mo 17 13 2
  
• N° werkstoff 1.4404
  
• AFNOR: Z2 CND 17-12
  
• BSI: 316S11
  
• The screws utilised are in austenitic alloy stainless steel, corrosion and heat resistant
  according to the following standards:
  
• UNI 6900: X 5 Cr Ni Mo 1712
  
• AISI: 316
  
• ISO quality: A4
  
• Resistance class ISO: 80
  
• UNI: Ente Nazionale Italiano di Unificazione, AISI: American Iron and Standard Institute,
• DIN: Deutsche Industrie Normen, AFNOR: Association Française de Normalisation, BSI: British Standard Institution, ISO: International Organization for Standardization.

MECHANICAL

• Cable glands: 2xPG13.5 (nickel-plated brass for external connections)
• 12mm (0.5in) thick front and 9mm (0.35in) thick back flange
  
• External body polishing
  
• Gaskets: High sealing O-ring
• Tempered window glass: Thick: 4mm (0.2in), Ø interno 150mm (5.9mm), Ø esterno 168mm (6.6in)
  
• External dimensions: Ø 200mm (7.9in) length 583mm (23in)
  
• Internal usable area (WxH): 112x112mm (4.4x4.4in)
  
• Internal usable length: 562mm (22.1in)
  
• Internal usable length (with heater): 477mm (18.7in)
• Internal usable length (with power supply and connection board): 465mm (18.3in)
  
• Unit weight:13kg (28.7lb)

ELECTRICAL

• Heating (Ton 15°C±3°C (59°F ±5°F), Toff 22°C±3°C (77°F±5°F))
  
• Power supply/Consumption: IN 12Vdc/24Vac, 20W max
  
• Power supply/Consumption: IN 120/230Vac, 40W max,80W max (double heater)
  
• Camera power supply
  
• IN 100-240Vac - OUT 12Vdc, 50/60Hz, 1A
  
• IN 230Vac - OUT 24Vac, 50/60Hz, 400mA

ELECTRICAL

• Heating (Ton 15°C±3° (59°F±5°F), Toff 22°C±3°C (77°F±5°F)
• Power supply/Consumption: IN 12Vdc/24Vac, 20W max
• Power supply/Consumption: IN 120/230Vac, 40W max
• Camera Power supply
• IN 100-240Vac - OUT 12Vdc, 50/60Hz, 1A
• IN 230Vac - OUT 24Vac, 50/60Hz, 400mA

ENVIRONMENT

• Indoor/Outdoor
• Operating Temperature with heating: -20°C/+60°C (-4°F/+140°F)
  
  

NXL1K1000 Specifications PDF