[DISCONTINUED] EXPTC010G Videotec Explosion Proof Housing for Thermal Cameras w/ 7.5m pre-installed Multipolar Cable, Preset, Autopan and Housing Heater 24VAC

The EXPT system includes a housing with the same characteristics of the EXHC000G and a Pan & Tilt, designed for movement both in horizontal and vertical planes. The peculiar characteristic of the EXPT device is the absence of external wiring in rotation, either for the control of the Pan & Tilt or for the camera and lens. This solution makes the installation and the maintenance of the Pan & Tilt easy. The EXPT includes one multiconductor cable that comes out from the base of the Pan & Tilt through a cable-gland. The EXPTC010G is supplied with preset, autopan and housing heater and optionally with sunshield.

• Solid anticorodal aluminium construction
• Epoxypolyester powder painting, RAL7032
• Germanium window
• IP66
• Housing supplied with heater.
• Sunshield as option

Specifications

General

• Non-corrosive die-cast aluminum (anticorodal)
• Bicomponent polyurethane enamel with orange peel effect, RAL7032

Mechanical

• 1x Ex d 3/4" NPT !P66 ATEX cable gland for armoured cable at the base of the P&T
• One multiconductors armoursed cable normally supplied 7.5m (24ft) length, diameter, 20.8mm (0.8in): 25 poles 0.5mm, 4 poles 1mm, 2RG175 of 750hm
• External dimensions - Ø 571x427.5x560mm (22.5x16.8x22in)
  
• Internal dimensions - Ø 180x460mm (7.1x18.1in)
  
• Internal usable area - 100x100x280mm (3.9x3.9x11in)
  
• Unit Weight: 56.5kg (124.6lb)
• Germanium Window
• Dimensions: Ø155mm (external), 114mm (4.5in) (internal)
• Thick: 12mm
• External scratch-resistant treatment: Hard Carbon Coating (DLC)
• Internal antireflection treatment
• Spectral range: 7um / 14

Electrical

• Power supply IN 24Vac, 50/60Hz
• Horizontal and vertical motor consumption: 50W max
• Standard vertical and horizontal preset potentiometers
• Heater Ton 10°C±4°C (50°F±7°F) Toff 25°C±3°C (77°F±5°F)
• IN 24VAC, consumption 20W max
• Devices to be installed inside the housing
• Cameras equipped with lens with max power 20W
• Power supply max 24Vac (only for analog camera)
• Usable volume for camera/lens: 2800cm3
• Maximum specifications of the installable camera with lens: 12mm

Environment

• Indoor / Outdoor
  
• Operating temperature with heater: -20°C / +50°C (-4°F / +122°F)

Certifications

• ATEX (EN 60079-0: 2010, EN 60079-1: 2008, EN 60079-31: 20109
  
• b II 2G Ex d IIC T6 Gb
  
• b II 2D Ex t IIIC T85 °C Db IP66
  
• c 0044: notify number from competent body
  
• IECEx (IEC 60079-0: 2007, IEC 60079-1: 2007, IEC 60079-31: 2008)
  
• Ex d IIC T6 Gb
  
• Ex t IIIC T85 °C Db IP66
  

EXPTC010G Specifications PDF