TXF-125E TAKEX 330' Selectable Range Detection 3.6V SAFT LS33600 Battery

The TXF-125E and TXF-125DM are battery operated quad photoelectric beam sensors designed for compatibility with leading wireless systems; reducing the time and cost of permanent installations and allowing the use of Active Infrared Beams on rapid deployment or temporary installations.

Specifications

• Model - TXF-125E
• Detection system - Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption)
• Infrared beam - Single modulation pulsed beam by LED (near infrared beam light-emitting diode)
• Protection distance - Outdoor 330'(100 m) or less
• Protection distance setting - 82'(25m), 165(50m), 247 (75m), 330'(100m) (4 distances selectable)
• Distance margin (maximum arrival distance) - 10 times 3300'(1000m)
• Response time - 0.05sec.,0.1sec 0.25sec.,0.5sec. (4-level changeover)
• Modulated beam frequency selection - 4channels
• Power supply voltage - 3.6VDC (recommended battery.SAFT thium thionyI chloride battery LS33600)
• Current consumption
  • 750A
  • Current consumption Transmitter Approx. 430A (during protection)
  • Receiver Approx. 320A (during protection) (normal temperature, 3.6VDC)
• Battery life
  • Transmitter Approx.S years (at normal temperature, with 2 recommended batteries, excluding a wireless transmitter)
  • Receiver - Approx.S years (detects 100 times a day, at normal temperature, with 2recommended batteries, excluding a wireless transmitter)
• ALARM OUTPUT (Receiver only) - Dry contact relay output form C 30VDC 0.1A (resistive load)
• Environment Output (Receiver only) - Dry contact relay output form C 30VDC 0.1A (resistive load)
• low Battery Output (Transmitter and Receiver) - Dry contact relay (N.C) 30VDC 0.1A (resistive load)
• TAMPER OUTPUT (Transmitter and Receiver) cover, back - Dry contact relay (N.C) 30V0DC 0.05A (resistive load) *hen the cover or the sens0r is removed
• Power Output (Transmitter and Receiver) - 3.0VDC 50mA MAX
• Beam adjustment - Horizontal: ±90, Vertical. ± 20°
• Alarm LED - Red LED (Receiver) ON when an alarm is initiated
• Attenuation LED - Red LED (Receiver) ON when beam is attenuated
• Ambient temperature - 13F to+140F (25Co+60C (No freezing or condensation), (The battery function may decrease at0C or less, or +40C or more)
• Functions
  • Sound check Wireless alignment checker connection
  • Monitor jack Battery saving
  • Upper/lower beam switch Repeat output
  • Low battery indication Battery sharing
• IP rating - IP 65
• Mounting position - Outdoor, Indoor
• Weight - Transmitter 52.502 (1500g) (excluding batteries), Receiver 54.302z (1550g) (excluding batteries)
• Appearance - Cover PC resin Wine red Base ASA resin Black

TXF-125E Specifications PDF