RDULTRA American Dynamics Dome Shell Ultra No Camera/Lens Capability

The SpeedDome Ultra Drone II is a fixed camera housed inside the SpeedDome Ultra chassis. This 330 line color camera – with its 1/3-inch, manual vari-focal, 3.5 mm to 8.0 mm lens – provides a value driven alternative for users who require fixed camera coverage, but like the appearance and deterrence of a fullfeatured dome camera.
The 370° pan and 90° tilt mechanism enables the internal camera and the eyeball to be manually positioned in any orientation. The friction bearings hold the camera in that fixed position, pointing at the desired camera view. The manual lens controls allow for zoom, iris and focus adjustments as necessary. A dummy model is also available without a camera/lens assembly.
For maximum flexibility, the drone can accommodate both types of SpeedDome Ultra mounting bases – the standard mounting base and the I/O board mounting base. This means that the drones are interchangeable with SpeedDome Ultra without the need for any re-cabling. The interchangeability allows customers to instal the drones at a facility and then replace them with programmable domes as budgets and/or needs change. In addition, customers can interchange the drones and the domes as surveillance requirements change.

Specifications

Operational

• Pan Travel - 370° with end stop
• Tilt Travel - 90°
• Camera Synchronization - Line-lock
• Video Output Connector - Female BNC

Camera

• Imager - Interline transfer 1/3 inch CCD array
• Scanning System - 2:1 interlace
• Video Output - 1.0 Vp-p, 75 Ω, composite
• S/N Ratio - >46 dB (typical)
• Horizontal Resolution - 330 lines at center
• Minimum Illumination - 1.5 lux (f1.2 lens)
• White Balance - Automatic, 3000°K to 7000°K
• NTSC
  • Effective Pixels - 512 (H) x 492 (V)
  • Scanning - 330 lines, 60 fields, 30 frames
  • Horizontal - 15.734 kHz
  • Vertical - 59.9 Hz
• PAL
  • Effective Pixels - 512 (H) x 582 (V) pixels
  • Scanning - 330 lines, 50 fields, 25 frames
  • Horizontal - 15.625 kHz
  • Vertical - 50 Hz

Lens

• Design - Vari-focal
• Focal Length - 3.5 to 8.0 mm
• Aperture - f1:1.4
• Mount - CS
• Viewing Angle
  • 3.5 mm - 78º H x 58º V
  • 8.0 mm - 35º H x 27º V
• Field of View Formulas
  • Horizontal View - = (4.4 x A)/B
  • Vertical View - = (3.3 x A)/B
  • A - = distance from camera (mm)
  • B - = lens focal length (mm)

Electrical

• Input Voltage - 24 VAC, 50/60 Hz, Class 2 LPS
• Design Tolerance - 16 to 36 VAC, 50/60 Hz
• Power - 7.5 watts, maximum

Mechanical

• Height - 205 mm (8 in)
• Eyeball Diameter - 120 mm (4.7 in)
• Weight
  • RDULTRA - 0.66 kg (1.45 lbs)
  • Max Shipping Weight - 2.15 kg (4.75 lbs)

Environmental

• Operating Temperature - 10° to 50° C (14° to 122°)
• Humidity - 0% to 95% RH (non-condensing)
• Storage Conditions - 20° to 65° C (-4° to 149° F)

Regulatory

• Emissions
  • FCC - 47 CFR Part 15, Subpart B Class A
  • CE - EN55022 Class B
  • CE - EN6100-3-2
  • CE - EN6100-3-3
  • AS/NZS 3548, Class A
  • CISPR22
  • ICES-003
• Immunity - CE - EN50130-4
• Safety
  • UL - UL1950
  • cUL - CSA 22.2 No. 950
  • CE - EN60950
  • IEC950

RDULTRA Specifications PDF