[DISCONTINUED] SLECDMAI-CB Napco StarLink Commercial DualPath Cellular and IP Burglary Radio - White Metal Enclosure - CDMA - Powered from Panel

The StarLink Dual-Path Commercial / Residential Fire and Burglary alarm capture radio IP communicators are fully supervised, wireless digital two-way subscriber units. All models are compatible with most 12/24VDC alarm control panels (always adhere to the documentation provided by the control panel manufacturer). All can function as a backup to existing telephone lines, or as sole path primary communicators. In backup mode, all units will automatically switch the communication channel from the telephone line to the network when telephone line trouble is detected.

Specifications

Electrical Ratings for 120VAC, 60Hz For Models with Power Supply

• Input Voltage: 120VAC nominal
• Input Current: 150mA maximum
• Maximum Charging Current: 200mA

Electrical Ratings for +12V / 24V For Models without Power Supply*

• Input Voltage: 10-25VDC regulated (power-limited output from Listed control panel).

• Input Current:
  • 10VDC standby: 110mA
  • 12VDC standby: 90mA
  • 15VDC standby: 150mA
  • 24VDC standby: 80mA (Commercial Fire models)
  • 5VDC standby: 65mA (Commercial Fire models)
  • Wi-Fi Module: (Optional) Add 40mA to the above.(With peak RF transmission current of 250mA).

Electrical Ratings for the IN 1 Burg/Fire Input:

• Input Voltage: 9-25VDC.
• Maximum Input Current: Up to 2mA from FACP NAC
• circuit

Electrical Ratings for IN 2 and IN 3:

• Maximum Loop Voltage: 25VDC.
• Maximum Loop Current: 1.2mA
• End of Line Resistor (EOLR) Value: 10K (2 req'd)

Electrical Ratings for 3 PGM Outputs:

• Open Collector Outputs: Maximum Voltage 3V when active; 25V maximum when not active.
• Maximum PGM Sink Current: 50mA (up to 15VDC), 25mA (15.1VDC - 25VDC)

Physical (W x H x D)

• Metal Housing: 111/2 x 91/2 x 31/2" (29.2 x 24.1 x 8.9cm)
• Mounting: Metal housing includes two keyhole slots for
• wall mounting (see measurements on page 7)

Environmental

• Operating Temperature: 0^ºC - 49^ºC (32^ºF - 120^ºF)
• Humidity: Maximum 93% Non-Condensing
• Indoor / dry location use only

SLECDMAI-CB Specifications PDF