HUBSAT4S-DISCONTINUED Altronix Passive UTP Transceiver Hub w/ Integral Camera Power

Altronix new HubSat4S Passive UTP Transceiver Hub w/Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 (or higher) structured cable. Unit provides 4 camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayA or HubWayD Video Balun/Combiners. In addition, the unit features 24VAC or 28VAC PTC protected outputs and surge suppression. Optionally, the HubSat4S can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 (or higher) structured cable back to the HubWay, HubWayLD or HubWayLDH Passive and Active UTP Transceiver Hubs. In addition, the HubSat4S powers these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Specifications

• Model Number - HUBSAT4S
• Input - 115VAC 50/60Hz, 3.5 amp. Primary fuse is rated at 3.5 amp/250V
• Video - Four (4) channels of video over twisted pair up to 750 ft. Four (4) 75 ohm video outputs.
• Data - RS422/RS485 data inputs.
• Power - Individual field selectable 24VAC and/or 28VAC outputs. Unit provides up to 1 amp max. per channel not to exceed total of 4 amp (100VA) maximum current. PTC’s are rated @ 1 amp per channel. Surge suppression.
• Visual Indicators - Four (4) individual power LED indicators.
• Features - Wall mount enclosure.
• Optional Accessories - HubWayA - Video Balun/Combiner for use with 24VAC cameras. HubWayD - Video Balun/Combiner for use with 12VDC cameras.
• Shipping Weight - 8.0 lbs.

[Specification PDF]