The cart is empty.
Dealers. First. Always.
DWG

AL400ULACMJ Altronix 8 Output Fused Power Supply/Charger w/ Controller and Large Enclosure 12VDC @ 4 Amp or 24VDC @ 3 Amp

SKU: AL400ULACMJ
  • Eight (8) independently controlled outputs
  • Output options: Eight (8) Fail-Safe and/or Fail-Secure power outputs, Eight (8) form “C” 5A rated relay outputs, Any combination of the above
  • Eight (8) auxiliary power outputs (unswitched).
  • Output fuses are rated @ 3.5A.
  • Filtered and electronically regulated outputs.
  • Supervision: AC Fail, Battery Fail and Battery Presence
  • Built-in charger for sealed lead acid or gel type batteries.
  • Instantaneous transfer to stand-by batteries.
  • UL Listed in the U.S. and Canada.
  • Lifetime Warranty / Made in the U.S.A.
More details...
Ordering Notes: Dealers Only
MSRP Price: $566.00
Online Price: $404.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

Altronix AL400ULACMJ converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 4A @ 12VDC or 3A @ 24VDC continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc.


Specifications


Inputs

  • Voltage - 115VAC, 60Hz.
  • Fusing - Varies, see Reference Chart.

Output

  • Voltage - 12VDC or 24VDC, see Reference Chart.
  • Current - Varies, depending on the model.
  • Protection - Fused 3.5A.
  • Auxiliary - 3.5A (unswitched).
  • Other - Overvoltage protection. Filtered and regulated outputs.

Back-up Battery (not included)

  • Capacity - 12AH / 12VDC (1 or 2 within enclosure). 18AH / 12VDC (requires larger "J" enclosure). 40 AH / 65 AH (requires separate enclosure).
  • Fuse Rating - 15A @ 32VDC AL600ULACM(J) does not have a battery fuse.
  • Type - Sealed lead acid or gel type.
  • Failover - Upon AC loss, instantaneous.

Fire Alarm Disconnect

  • Latching or non-latching, individually selectable for any or all of the eight (8) outputs.

Supervision

  • AC Failure - Form "C" contacts.
  • Battery - Form "C" contacts.

Indicators (LED)

  • Input - 115VAC is present.
  • DC Output - Powered.
  • Battery - Discharged or not connected.
  • Relays - Individual LEDs indicate outputs are triggered (relays energized).
  • FACP - Indicates FACP disconnect is triggered.

Agency Listings

  • All Models
    • UL
      • UL294 - Access Control System Units.
    • cUL
      • CSA C22.2 No.205 - Signal Equipment.
  • AL400ULACM(J), AL600ULACM(J) only
    • CSFM - California State Fire Marshal Approved.

Physical and Environmental

  • Dimensions (H x W x D) - 18" x 14.5" x 4.625" (457.2mm x 368.3mm x 117.48mm).
  • Product Weight / Shipping (approx.)
    • Product Weight - 14 lbs. (6.35 kg)
    • Shipping Weight - 15 lbs. (6.8 kg)
  • Temperature
    • Operating - 0°C to 49°C (32°F to 120°F).
    • Storage - -20°C to 70°C (-4°F to 158°F).
  • Relative Humidity - 85% +/-5%
  • BTU/Hr. (approx.)
    • 12VDC - 25
    • 24VDC - 37

AL400ULACMJ Spec Sheet

AL400ULACMJ Installation Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In