The cart is empty.
Dealers. First. Always.
DWG

AL1012ULACMCBJ Altronix 8 Output PTC Power Supply/Charger w/ Controller and Large Enclosure 12VDC @ 10 Amp

SKU: AL1012ULACMCBJ
  • Eight (8) independently controlled Fail-Safe and/or Fail-Secure power outputs
  • Class 2 Rated power-limited PTC Protected Outputs (auto-resettable)
  • Eight (8) auxiliary power outputs (unswitched)
  • Output PTCs are rated @ 2.5A
  • Filtered and electronically regulated outputs
  • Supervision: AC Fail, Battery Fail and Battery Presence
  • Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs
  • Alarm output relay indicates that FACP input is triggered
More details...
Ordering Notes: Dealers Only
MSRP Price: $670.00
Online Price: $479.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

Altronix ACMCB series distribute and switch power to access control systems and accessories. They convert a 115VAC, 60Hz input into eight (8) independently con-trolled 12VDC or 24VDC Class 2 Rated power-limited PTC protected outputs. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm discon-nect feature is individually selectable for any or all of the eight (8) outputs.


Specifications


Input

  • Voltage Range - 115VAC, 60Hz.
  • Fusing - Varies, see Reference Chart.

Outputs

  • Voltage - 12VDC or 24VDC, see Reference Chart.
  • Current - Varies, depending on the model.
  • Protection - PTC 2.5A.
  • Auxiliary - 3.5A (unswitched).
  • Other - Overvoltage protection.Filtered and regulated outputs.

Back-up Battery (not included)

  • Capacity - 12AH / 12VDC (1 or 2 within enclosure).18AH / 12VDC (requires larger "J" enclosure).40 AH / 65 AH (requires separate enclosure).
  • Type - Sealed lead acid or gel type.
  • Fuse Rating - 15A @ 32VDC AL600ULACM(J) does not have a battery fuse.
  • Failover - Upon AC loss, instantaneous.

Fire Alarm Disconnect

  • Latching or non-latching, individually selectable for any or all of the eight (8) outputs.

Supervision

  • AC Failure - Form "C" contacts.
  • Battery - Form "C" contacts.

Indicators (LED)

  • Input - 115VAC is present.
  • DC Output - Powered.
  • Battery - Discharged or not connected.
  • Relays - Individual LEDs indicate outputs are triggered (relays energized).
  • FACP - Indicates FACP disconnect is triggered.

Agency Listings

  • All Models
    • UL
      • UL294 - Access Control System Units.
    • cUL
      • CSA C22.2 No.205 - Signal Equipment.

Physical and Environmental

  • Dimensions (H x W x D) - 18" x 14.5" x 4.625" (457.2mm x 368.3mm x 117.48mm).
  • Product Weight - 14.1 lbs. (6.40 kg)
  • Shipping Weight - 15 lbs. (6.80 kg)
  • Temperature
    • Operating - 0°C to 49°C (32°F to 120°F).
    • Storage - -20°C to 70°C (-4°F to 158°F).
  • Relative Humidity - 85% +/-5%
  • BTU/Hr. (approx.) - 12VDC: 61

AL1012ULACMCBJ Spec Sheet

AL1012ULACMCBJ Installation Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In