AL400UL3X Altronix Triple Voltage Power Supply/Charger w/ Large Enclosure 5VDC/12VDC @ 1.75 Amp and 24VDC @ 1.5 Amp

Altronix AL400UL3X triple output power supply/charger is designed for use with access control systems and accessories. It converts a 115VAC / 60Hz input into three (3) individually PTC protected 5VDC, 12VDC, and 24VDC regulated outputs.

Specifications

Input

• Voltage - 115VAC, 60Hz, 1.45A.

Outputs

• Three (3) Class 2 Rated power-limited auto-resettable outputs
  • 5VDC @ 1.75A continuous supply current.
  • 12VDC @ 1.75A continuous supply current.
  • 24VDC @ 1.5A continuous supply current.
• Other - Short circuit and thermal overload protection.Filtered and electronically regulated outputs.

Back-up Battery (not included)

• Type - Sealed lead acid or gel type.
• Failover - Upon AC loss, instantaneous.

Supervision

• AC Failure - Form “C" contacts.
• Low Battery - Form “C" contacts
• Battery Presence - Form “C" contacts.

Indicators (LED)

• Input - Input voltage is present.
• DC Output - Powered.

Agency Listings

• UL
  • UL294 (Access Control).
  • UL603 (Power Supplies for Use with Burglar Alarm Systems).
  • UL1069 (Hospital Signaling and Nurse Call Equipment).
  • UL1481 (Fire Protective Signaling Systems).
• cUL - CSA Standard C22.2 No.205-M1983, Signal Equipment.
• CSFM - CSFM Approved.
• MEA - NYC Department of Buildings Approved.

Physical and Environmental

• Dimensions (H x W x D) - 15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm) Enclosure accommodates up to two (2) 12VDC/12AH batteries.
• Product Weight - 10.65 lbs. (4.83 kg).
• Shipping Weight - 11.95 lbs. (5.42 kg).
• Temperature
  • Operating - 0ºC to 49ºC (32ºF to 120ºF).
  • Storage - -20ºC to 70ºC (-4ºF to 158ºF).
• Relative Humidity - 85% +/-5%.
• BTU/Hr. (approx.) - 34 BTU/Hr

AL400UL3X Spec Sheet

AL400UL3X Installation Manual