POE125U-8-C Phihong 8 Port Gigabit Power over Ethernet Midspan for 10/100/1000 Base-T Networks with Cisco Legacy Support

Specifications:

• AC Input Voltage Range - 90 to 264V AC
• Input Voltage Rating - 100 to 240V AC
• Input Frequency4 - 7 to 63Hz
• Input Current - 2.5A (RMS) maximum for 90V AC, 1.3A (RMS) maximum for 230V AC
• Leakage Current - <3.5mA maximum at 254V AC, 60Hz
• AC Inrush Current - 30A (RMS) maximum for 115V AC, 60A (RMS) maximum for 230V AC
• Total Output Power - 15.4W per port, 125W Total Power
• Ripple and Regulation - 100mV maximum
• Efficiency - 75% (typical at maximum load, and 120V AC 60Hz
• Hold-up Time - 10mS minimum 120V AC and maximum load
• Transient O/P Voltage Protection - 60V maximum at switch on and off at any AC line phase
• Turn-On Delay Time - 3 sec maximum at maximum load, and 120V AC 60Hz, 25Hz
• Immunity - ESD: EN61000-4-2 Level 3, RS: EN61000-4-3 Level 2, EFT: EN61000-4-4 Level 2, Surge: EN61000-4-5 Level 3, CS: EN61000-4-6 Level 2, Voltage Dips: EN61000-4-11, Harmonic: EN61000-3-2 Class A
• IEEE802.3af Interoperability - UNH Interoperability report available upon request
• Cisco Legacy Detection (Option) - No extern parts required for Legacy devices: VoIP, Phones: 7910,7912,7940,7960, Access Points: 350,1100,1200
• Over Voltage/Current, Short Circuit Protection - Outputs equipped with short circuit protection and overload protection as per 802.3af specification The output can be shorted permanently without damage
• Over Temperature Protection - Automatic shutdown without damage
• Indicators - Green LED: Power detected “ON”, Yellow LED: Fault Detected
• Input Connector - AC Input IEC320 3 Pin
• Warranty - 1 Year

POE125U-8C Specifications PDF