POE30U-560G-HT Phihong 30W Power over Ethernet Adapter High Power Single Port Injector High Temperature

• Model Number - POE30U-560GHT
• Input Voltage Range - 85 to 264VAC
• AC Input Voltage Rating - 100 to 240VAC
• AC Input Frequency - 100 to 240VAC
• AC Input Current -
• 15A (RMS) maximum for 115VAC
• 20A (RMS) maximum for 230VAC
• Leakage Current -
• 0.25mA maximum for 264VAC 50Hz for input to PE
• 3.5mA maximum for 264VAC 50Hz for input to output
• AC Inrush Current -
• 15A (RMS) maximum for 115VAC
• 20A (RMS) maximum for 230VAC
• Total Output Power - 30W at 56V DC
• Regulation - Line and Load 54-57V DC under all conditions
• Efficiency - 75% (typical) at maximum load, and 120VAC 60Hz
• Temperature -
• Operation : -20 to +55°C
• Non-operation : -40 to +85°C
• Humidity : -40 to +85°C
• Isolation Test -
• Primary to Secondary: 4242VDC for 1 minute 10mA
• Primary to F.G.: 2121VDC for 1 minute
• Output to F.G.: 2121VDC
• Immunity -
• ESD: EN61000-4-2. Level 3
• RS: EN61000-4-3. Level 2
• EFT: EN61000-4-4. Level 2
• Surge: EN61000-4-5. Level 3
• CS: EN61000-4-6. Level 2
• Voltage Dips: EN61000-4-11
• Harmonic: EN61000-3-2
• EMC - FCC Part 15 Class B, EN55022 Class B
• Insulation Resistance -
• Primary to Secondary: >10M OHM 500VDC
• Primary to Field Ground: >10M OHM 500VDC
• Over Voltage/Current, Short Circuit Protection - Output can be shorted permanently without damage
• Input Connector - IEC320 inlet 3 pin
• Output Connector -
• +pins 3, 6
• -pins 1, 2
• Hold-up Time - 16mS min. and 120VAC at maximum load
• DC Offset - No data degradation with DC imbalance 18mA per min.
• Transient O/P Voltage Protection - 60V maximum zener clamp
• IEEE 802.3at Interoperability - UNH Interoperability report available upon request
• Safety Approvals - cUL/UL, CE, Korea K, C-Tick, CCC, SAA, S-Jet, IRAM

POE30U-560GHT Specifications PDF