PA-5312 TAKEX Passive IR Sensor 40' Wide Angle, Wall & Ceiling Mount, "Snap In Base", N/O N/C

Specifications

• Detection System - Passive infrared (Quad)
• Coverage - Wide angle 12m (40') Max.
• Sensitive zone - 18 pairs (72)
• Supply voltage - 9.5V to 30V DC (non-polarity)
• Power consumption - 25mA Max. (N.C. /N.O. contact)
• Alarm output - Dry contact relay output : N.O. or N.C. selectable Reset time : approx. 2sec. 24V (AC/DC) 0.25A Max (protective resistor 3.3Ω)
• Tamper output - Dry contact N.C. Open when cover or body is detached 30V DC 0.1A Max.
• Alarm memory - 3min. -Flickering, 47min. -Lighting
• Slight motion detection - Sensitive zone : 36 pairs
• Alarm LED - Red LED Flickering (every 0.5 sec.) : Warming-up Lighting (approx.2sec.) : Alarm Flickering (every 0.25 sec.) : Unit trouble alarm Continuous lighting : Low voltage/positioning trouble alarm (LED can be disabled except trouble indicaiton)
• Memory LED - Yellow LED Flickering : Memory activated Lighting : Memory indicated
• Trouble signal - Unit trouble : Monitoring inner circuit and wiring damage, Operation : Trouble alarm, Low voltage trouble : Monitoring low voltage, Operation : Trouble alarm, Positioning : Monitoring failure to replace sensor head, Operation : Trouble alarm
• Ambient temperature range - -10°C to +55°C
• Mounting position - Ceiling, wall (indoor)
• Wiring connections - Terminals
• Weight - 250g (8.75 oz)
• Appearance - Body, Cover : Resin
• Weight - Ceiling mount Vertically : 26°, Horizontally : ±15°, Wall mount : Vertically 20° Horizontally ± 5°

PA-5312 Specifications PDF