[DISCONTINUED] 1430009 Potter DSD-P Duct Smoke Detector

The Potter Electric DSD-P duct smoke detector provides early detection of smoke and products of combustion present in air moving through HVAC ducts in commercial, industrial and residential applications. The DSD is designed to prevent the recirculation of smoke in areas by the air handling systems, fans and blowers. Complete systems may be shut down in the event of smoke detection. The DSD-P operates on 115 VAC, 24 VAC and 24 VDC.

• Operating Voltage - 115V AC, 24V C/DC
• Detector Head Model - SLR-24DH
• Detector Head Type - Conventional Photoelectric
• Power Requirements Standby:
• 115 VAC - 14mA
• 24 VAC - 20mA
• 24 VDC - 13mA
• Power Requirements Alarm:
• 115 VAC - 28mA
• 24 VAC - 95mA
• 24 VDC - 60mA
• Alarm Contacts - 1 form "C" and 1 form "A" rated at 10 amps at 115 VAC
• Detection Loop - 1 form A (1A)
• Trouble Contacts - 1 form "C"
• Sensitivity Test Method - Self diagnostic test
• Remote Indication Capability* - Power, Alarm, Horn, Piezo, Test
• Air Velocity - 300 to 4000 ft./min
• Ambient Temperature - 32™F to 120™F (0™C to 49™C)
• Humidity - 10% to 85% Relative humidity (non-condensing)
• Housing Material - 18 G.A. steel backbox, clear plastic cover
• Finish - Grey paint
• Dimensions - 9 1/8"L x 7 1/4" W x 2 1/4" H
• Maximum Net Weight - 3 lbs.
• Radioactive Element - DSD-I only: Americum 24I 0.5 micro-curie
• Rugged gray steel back box with clear cover
• Accessories - Remote power, remote alarm indication capability and remote, horn/piezo capability
• Meets UL 268A Requirements

*Refer to DSD Accessories Data Sheet for Specifications

1430009 Specifications PDF