ACM4CB Altronix 4 Output Access Power Controller Module - PTC Output

Specifications

Input

• Voltage - 12 to 24 VAC or VDC operation (setting not required), 0.4A @ 12V, 0.2A @ 24V current consumption with all relays energized, Main fuse is rated at 10A
• Trigger Inputs - Four (4) Access Control System trigger inputs: Four (4) normally open (NO) inputs, Four (4) open collector sink inputs, Any combination of the above
• Input Options - One (1) common power input (board and lock power), Two (2) isolated power inputs (one (1) for board power and one (1) for lock/accessory power)

Outputs

• Four (4) independently controlled Class 2 Rated
• PTC protected power-limited auto-resettable 2A outputs: Four (4) Fail-Safe and/or Fail-Secure power outputs.
• Four (4) auxiliary power outputs (unswitched).
• Output ratings - Output PTCs are rated 2A each.
• Note - Total output current is determined by the power supply, not to exceed a maximum of 10A total.

Indicators (LED)

• Red LEDs - Outputs are triggered (relays energized).
• Green LED - FACP disconnect is triggered.

Agency Listings

• UL - Access Control - UL294
• cUL - General Signaling Equipment Evaluated to CSA Standard C22.2 No.205-M1983.

Physical and Environmental

• Dimensions (L x W x H) - 5.175" x 3.36" x 1.25" (131.4mm x 85.3mm x 31.8mm).
• Product Weight - 0.35 lbs. (0.16 kg).
• Shipping Weight - 0.45 lbs. (0.2 kg).
• Operating Temperature - 0°C to 49°C (32°F to 120°F).
• Storage Temperature - -20°C to 70° C (-4°F to 158°F).
• Relative Humidity - 85% +/-5%.
• BTU/Hr (approx.) - 12VAC or VDC - 2 BTU/Hr, 24VAC or VDC - 3 BTU/Hr.

ACM4CB Specifications Sheet

ACM4CB Installation Manual