MAXIMAL1R Altronix 16 Output Fused Rack Mount Power Supply/Charger w/ Controller 12VDC @ 4Amp or 24VDC @ 3Amp

Maximal Rack Mount Series units distribute and switch power to access control systems and accessories. They convert a 115VAC 50/60Hz input into eight (8) or sixteen (16) independently controlled 12VDC and/or 24VDC fuse protected outputs. Outputs are activated by a normally open (NO) or normally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc.

Specifications

Input

• Voltage - 115VAC, 50/60Hz.
• Fusing - Varies, See Reference Chart.

Outputs

• Voltage - 12VDC and/or 24VDC, see Reference Chart.
• Current - Varies, see Reference Chart.
• Protection - Fused 2.5A.
• Other - Overvoltage protection, Filtered and regulated outputs.

Back-up Battery(separate enclosure is required)

• Type - Sealed lead acid or gel type
• Fuse Rating - 15A @ 32VDC (Maximal1RH and Maximal1R); Maximal3RH, Maximal3R, and Maximal33R do not have a battery fuse.
• Failover - Upon AC loss, instantaneous.

Fire Alarm Disconnect

• Supervised - Latching or non-latching, individually selectable for any or all of the outputs.

Supervision

• AC Failure - Form “C” contacts.
• Battery - Form “C” contacts.

Indicators (LED)

• Input - Illuminated ON/Reset Switch.
• Output - Individual Output Status LEDs located on the front panel.

Physical and Environmental

• Dimensions (H x W x D) - 3.25” x 19.125” x 8.5” (82.55mm x 485.78mm x 215.9mm).
• Product Weight - 10.7 lbs. (4.85 kg)
• Shipping Weight - 12.7 lbs (5.76kg)
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF).
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF).
• BTU/Hr. (approx.) - 12VDC - 25, 24VDC - 37, 12 and 24VDC - N/A

MAXIMAL1R Specifications PDF

MAXIMAL1R Manual