The cart is empty.
Dealers. First. Always.
DWG

AL1042ULADA Altronix NAC Power Extender w/ Large Enclosure 24VDC @ 10Amp - (2) 1Amp Outputs

SKU: AL1042ULADA

AL1042ULADA is an extremely cost effective voltage regulated remote NAC Power Extender. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and providing auxiliary power to support system accessories.


Specifications


Input

  • Voltage - 120VAC, 60Hz, 5A.
  • Two (2) Class A, Style Z or two (2) Class B, Style W, X, Y FACP inputs.
  • Two (2) NC dry contact trigger inputs.
  • Input Ratings (INP1 and INP2):
    • 8-30VDC 6.5mA max from FACP
    • 12V 6.5mA, 24V 6.5mA from FACP

Output

  • Voltage - 24VDC Class 2 Rated power-limited outputs.
  • Current - 10A max. total alarm current. 2.5A max. current per output.
  • Two (2) outputs may be paralleled for more power on an indicating circuit.
  • Auxiliary - Two auxiliary outputs rated at 1A each (1A continuous, 1A AC disconnect).
  • Other - Thermal and short circuit protection with auto reset. Filtered and regulated outputs.
  • Programmable Supervised Indicating Circuit Outputs:
    • Four (4) Class B, Style W, X, Y, or Two (2) Class A, Style Z or One (1) Class A, Style Z and Two (2) Class B, Style W, X, Y.

Back-up Battery

  • Type - Sealed lead acid or gel type.
  • Failover - Upon AC loss, instantaneous.

Supervision

  • AC Failure - Form "C" contacts.
  • Battery - Form "C" contacts.

Indicators (LED)

  • AC Power (Green) - Input voltage is present.
  • DC Output (Red) - Powered.
  • Logic Board (Red and Green) - Output status.

Agency Listings

  • UL - UL864 (Control Units and Accessories for Fire Systems).
  • MEA - NYC Department of Buildings Approved.
  • FM - Factory Mutual Approved.
  • CSFM - California State Fire Marshal Approved.

Special Features

  • 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate.
  • Sync protocols include Potter/Amseco, Faraday, Gentex, System Sensor, and CooperWheelock.
  • Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit).
  • Compatible with 12VDC or 24VDC fire panels.
  • Output loop supervision steered to input 1 or input 2.
  • Signal circuit trouble memory (helps identify intermittent loop problems).
  • Common trouble input and output for external trouble signals tie-in.
  • Ground fault detection.

Physical and Environmental

  • Dimensions (H x W x D) - 18" x 14.5" x 4.625" (457.2mm x 368.3mm x 117.48mm). Enclosure accommodates up to two (2) 12VDC/18AH batteries.
  • Product Weight - 14.8 lbs. (6.71 kg).
  • Shipping Weight - 19.15 lbs. (8.69 kg).
  • Temperature
    • Operating - 0°C to 49°C (32°F to 120°F).
    • Storage - -20°C to 70°C (-4°F to 158°F).
  • Relative Humidity - 85% +/-5%.
  • BTU/Hr. (approx.) - 31 BTU/Hr.

AL1042ULADA Specifications Sheet

AL1042ULADA Installation Manual

Ordering Notes: Dealers Only
MSRP Price: $982.00
Online Price: $701.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item

Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In