The cart is empty.
Dealers. First. Always.
DWG

ACM4CBE Altronix 4 Output Access Power Controller Module w/ Enclosure - PTC Output

SKU: ACM4CBE
  • Altronix ACM4CBE converts one (1) 12 to 24 volt AC or DC input into four (4) independently controlled Class 2 rated PTC protected power-limited auto-resettable outputs rated at 2A each
  • Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc.
  • ACM4CBE will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc.
More details...
Ordering Notes: Dealers Only
MSRP Price: $196.00
Online Price: $140.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

Specifications


Input

  • Voltage
    • 12 to 24 VAC or VDC operation (setting not required), 0.4A @ 12V, 0.2A @ 24V current consumption with all relays energized.
    • Main fuse is rated at 10A.
  • Trigger Inputs - Four (4) Access Control System trigger inputs:
    • Four (4) normally open (NO) inputs.
    • Four (4) open collector sink inputs.
    • Any combination of the above.
  • Input Options
    • One (1) common power input (board and lock power).
    • Two (2) isolated power inputs (one (1) for board power and one (1) for lock/accessory power).

Outputs

  • Four (4) independently controlled Class 2 Rated
  • PTC protected power-limited auto-resettable 2A outputs:
    • Four (4) Fail-Safe and/or Fail-Secure power outputs.
  • Four (4) auxiliary power outputs (unswitched).
  • Output ratings - Output PTCs are rated 2A each.
  • Note - Total output current is determined by the power supply, not to exceed a maximum of 10A total.

Indicators (LED)

  • Red LEDs - Outputs are triggered (relays energized).
  • Green LED - FACP disconnect is triggered.

Agency Listings

  • UL
    • Access Control - UL294
  • cUL
    • General Signaling Equipment Evaluated to CSA Standard C22.2 No.205-M1983.

Physical and Environmental

  • Enclosure Dimensions (H x W x D) - 8.5" x 7.5" x 3.5" (215.9mm x 190.5mm x 88.9mm).
  • Product Weight - 3.4 lbs. (1.55 kg).
  • Shipping Weight - 3.9 lbs. (1.77 kg).
  • Temperature
    • Operating - 0°C to 49°C (32°F to 120°F).
    • Storage - -20°C to 70° C (-4°F to 158°F).
  • Relative Humidity - 85% +/-5%.
  • BTU/Hr (approx.)
    • 12VAC or VDC - 2 BTU/Hr.
    • 24VAC or VDC - 3 BTU/Hr.

ACM4CBE Specifications Sheet

ACM4CBE Installation Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In