POE16R-1AFG-US Phihong IEEE802.3af - Gigabit Injector with US Wall Plug

Specifications:

• AC Input Voltage Range - 90 to 264V AC
• AC Input Voltage Rating - 100 to 240V AC
• AC Input Current - 0.8A (RMS) maximum for 90VAC, 0.5A (RMS) maximum for 240VAC
• Leakage Current - 0.25mA maximum @ 254VAC 60Hz
• AC Input Frequency - 47 to 63Hz
• AC Inrush Current - 15A (RMS) maximum for 115V AC, 20A (RMS) maximum for 230V AC
• Total Output Power - 15.4W
• Efficiency - 75% (typical) at maximum load, and 120VAC 60Hz
• Hold-up Time - 16mS minimum at maximum load and 120VAC, 60Hz
• Transient O/P Voltage Protection - 60V maximum at switch on/off at any AC line phase
• Operation Temperature - 0 to +40C
• Non-Operation Temperature - -25 to +65C
• Humidity - 5 to 90%
• EMC - FCC Part 15 Class B, EN55022 Class B
• Isolation Test - Primary to Secondary: 3000VAC for 1 second 10mA
• Immunity - ESD: EN61000-4-2 Level 3, RS: EN61000-4-3 Level 2, EFT: EN61000-4-4 Level 2, Surge EN61000-4-5 Level 3, CS: EN61000-4-6 Level 2,Voltage Dips EN61000-4-11, Harmonic: EN61000-3-2 Class A
• Insulation Resistance - Primary to Secondary: >10M OHM 500VDC
• Over Voltage/Current, Short Circuit Protection - The output is equipped with short circuit protection and overload protection as per IEEE802.3af specifications and conforms to UL60950-2. The output can be shorted permanently without damage.
• Indicators - Solid Green: Valid IEEE802.3af load detected and connected ON; Blinking Green/Red: Invalid load connected Solid LED: Fault detected
• Data in/Output Connector - RJ45
• Output Connection (Standard Model) - +pin 4,5 / -pins 7,8
• Output Connection (Gigabit Model) - +pin 3,6 / -pins 1,2
• Warranty - 1 Year

POE16R-1AFG-US Spec Sheet