V100 Bogen Power Vector 100W Modular Amplifier

Bogen's Power Vector modular amplifiers offer a wide range of power levels from which to choose, with five models from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems.
Each model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules. Two module bays are capable of accepting plug-in signal-processing output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level.
Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).

Specifications

• Power Output (RMS) - V100
• Rated - 140W
• Typical @ 1 kHz - 140W
• Frequency Response
  • Transformer - 45 Hz to 20 kHz; +0/-2 dB
  • Direct - 20 Hz to 20 kHz; +0/-1 dB
• Distortion
  • Transformer - < 0.5%**
  • Direct - < 0.1%** (.05 typical @ 1 kHz)
• Signal-to-Noise†
  • Fundamental - -94 dB
  • With SAX1R Module - -70 dB
  • With MIC1S Module - -60 dB
  • With TEL1S Module - -70 dB
• Tone Controls
  • Bass Frequency - @100 Hz (+/- 10 dB minimum)
  • Treble Frequency - @10 kHz (+/- 10 dB minimum)
  • Low Cut Frequency - @125 Hz (-6 dB/octave)
• Sensitivity - 0.4V (at backplane connector)
• Output Regulation - 2 dB or better, no load to full load
• Output Impedance
  • Transformer-Coupled - 70V, 25V, 8 ohms (bal or unbal)
  • Direct Coupled - 4 ohms (minimum)
• Thermal Emissions BTU/hr.) - V100/495.2
• Inserts
  • Insert "OUT" Level - 1VRMS (@FRP)
  • Insert "OUT" Impedance - 50 ohms maximum
  • Insert "IN" Sensitivity - 1VRMS
  • Insert "IN" Impedance - 10k ohms minimum
• Bridging In/Out
  • Bus Level - 250 mVRMS (@FRP)
  • Bus Impedance - 10k ohms maximum
• Pre-EQ Output
  • Output Level - 4VRMS (@FRP)
  • Output Impedance - 50 ohms maximum
• AC Power Receptacle - 500 watts maximum power, unswitched
• AC Voltage - 120V AC, 60 Hz
• AC Current - V100/2.0A
• Product Weight (lb.) - V100/28
• Dimensions - 17-1/4" W x 3-7/8" H x 14-3/4" D (all models)

V100 Specifications PDF

V100 Installation Manual