FVR21 Comnet Dual Video Receiver With Manual Gain, mm, 2 fiber

The ComNet FVR21 dual video receiver detects two independent AM video signals in one module on two independent multimode fiber optic cables. The module is not a multiplexer. The module is ideal for CCTV installations and the rack mount version can be used to double the fixed video capacity of the C1 rack for up to 28 independent video channels per card cage. The modules utilize Manual Gain Control. The receiver is compatible with the ComNet FVT11M and the FVT20 dual video transmitter. Plug-and-play design ensures ease of installation. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

Specifications

Video

• Video Input - 1 volt pk-pk (75 ohms)
• Bandwidth - 5 Hz - 10 MHz
• Differential Gain - <5%
• Differential Phase - <5°
• Tilt - <1%
• Signal-to-Noise Ratio (SNR)
  • 60 dB typical
  • 54 dB minimum
• Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
• Wavelength - 850 nm, Multimode
• Number of Fiber - 2

Connetors

• Optical - ST
• Power - Terminal Block
• Video - BNC (Gold Plated Center-Pin)

Led Indicator

• Video Presence for Each Channel

Electrical & Mechaninsal

• Power Surface Mount - 8-15 VDC @ 130 mA
• Rack - From Rack
• Number of Rack Slots - 1
• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size (in./cm) (L×W×H) Surface Mount - 6.1 × 5.3 × 1.1 in., (15.5 × 13.5 × 2.8 cm)
• Shipping Weight - <2 lb./0.9 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40° C to +75° C
• Storage Temp - -40° C to +85° C
• Relative Humidity - 0% to 95% (non-condensing)

FVR21 Specifications PDF

FVR21 Manual