FVT1C1BM1-M Comnet Digitally Encoded Video Transmitter and Contact Closurer, mm, 1 fiber

The ComNet FVT1C1B-M Video Transmitter supports transmission of one analog video signal and a single simplex contact closure over one multimode or single mode optical fiber. The contact closure channel may be used with triggered-event CCTV camera systems, or other applications such as access controlled gates, doors, or other equipment requiring remote actuation and control. This module is universally compatible with all major CCTV camera manufacturers. Housed in a compact, rugged, and lightweight package, this surface/shelf-mount unit is ideal for those installations where space may be limited, and may be DIN-rail mounted by the addition of ComNet DINBKT2 Adaptor Plate Kit. Plug-and-play design ensures ease of installation, and no electrical or optical adjustments are ever required. The FVT1C1B(M)(S)1-M Transmitter is fully compatible with ComNet model FVR4C4B(M)(S)4 4-Channel Video/4-Channel Contact Closure Receiver Unit.

Specifications

Video

• Video Input - 1 volt pk-pk (75 ohms)
• Overload - >1.5V pk-pk
• Bandwidth - 5 Hz - 8 MHz
• Differential Gain - <2%
• Differential Phase - <2°
• Tilt - <0.5%
• Signal-to-Noise Ratio (SNR) - 60 dB @ Maximum Optical Loss Budget

Contact

• Interface - Response Time - 0.5 msec
• Input - Dry Contact Closure (0-3.3V, 1mA max. @ 0VDC)

Connectors

• Optical - ST
• Power - 2.1mm Center Positive Plug
• Video - BNC
• Contact - Screw Terminal Block
• Wavelength - 1310 nm
• Number of Fiber - 1

Led Indicator

• Power - Video (Sync Presence for each Video Channel)

Electrical & Mechanical

• Power Surface Mount - 5 VDC @ 0.25A
• Circuit Board - Meets IPC Standard
• Surface Mount (L × W × H) - 3.3 × 2.5 × 1.1 in., (8.4× 6.4 × 2.8 cm)
• Shipping Weight - <1 lb./0.45 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40˚ C to +75˚ C
• Storage Temp - -40˚ C to +85˚ C
• Relative Humidity - 0% to 95% (non-condensing)

FVT1C1BM1-M Specifications PDF

FVT1C1BM1-M Manual