The cart is empty.
Dealers. First. Always.
DWG

FVT10C1S1-M Comnet Digitally Encoded Video Transmitter and Contact Closure, 10-Bit, sm, 1 fiber

SKU: FVT10C1S1-M
  • 12VDC or 24VAC - can be powered directly from camera
  • 10-bit Digitally Encoded Video for High-Quality transmission over a Single Fiber
  • Supports one Contact Closure in the direction of video, ideal for tamper switch, etc.
  • Multimode Fiber Support for Distances up to 4 km (2.5 mi)
  • Single-Mode Fiber Support for Distances up to 54 km (33.6 mi)
  • Exceeds All Requirements for EIA RS-250C Short-Haul Transmission Specifications
  • Laser Diode for Transmission of Optical Signals
  • Compatible with NTSC, PAL, or SECAM Video Standards
More details...
MSRP Price: $630.00
Online Price: $512.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

The ComNet FVT10C1(M,S)1/M series video transmitters transmit one channel of video plus one contact closure over one optical fiber. The FVT10C1M transmitter is available multimode and single-mode versions.
This FVT10C1M is compatible with the FVR20C2(M,S)2 series dual channel receivers. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units have a small footprint and are ideal for mounting where space limited or can be mounted inside equipment housing.


Specifications


Video

  • Video Input - 1 volt pk-pk (75 ohms)
  • Overload - >1.5V pk-pk
  • Bandwidth - 5 Hz - 10 MHz
  • Differential Gain - <2%
  • Differential Phase - <0.7º
  • Tilt - <1%
  • Signal-to-Noise Ratio (SNR) - >67 dB typical @ Maximum Optical Loss Budget
  • Max. RG-59 COAX - 100m (300ft) Camera to Fiber Optic Module to maintain bandwidth
  • Wavelength - 1310 nm, MM and SM
  • Optical Emitter - Laser Diode
  • LED Indicators - Video – Contact

Connectors

  • Optical - ST
  • Power - Terminal Block
  • Video - BNC
  • Contact - Terminal Block

Electrical & Mechanical

  • Power Surface Mount - 9 – 36VDC @ 2W or 12 – 24 VAC @ 2W
  • Current Protection - Automatic Resettable Solid-State Current Limiters
  • Circuit Board - Meets IPC Standard
  • Size (in./cm) (L×W×H) - 4.5 × 2.2 × 1.1 in. (11.7 × 5.5 × 2.7 cm)
  • Shipping Weight - <2 lb./0.9 kg

Environmental

  • MTBF - >100,000 hours
  • Operating Temp - -40˚ C to +75˚ C
  • Storage Temp - -40˚ C to +85˚ C
  • Relative Humidity - 0% to 95% (non-condensing)

FVT10C1S1-M Specifications PDF

FVT10C1S1-M Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In