The cart is empty.
Dealers. First. Always.
DWG

FVT1014S1 Comnet Digitally Encoded Video Transmitter + 4 Bi-directional Data Channels, sm, 1 fiber

SKU: FVT1014S1
  • 10-bit digital video transmission: transmits one real-time color video signal and 4 bi-directional data signals on one optical fiber
  • Supports RS232, RS422, and 2 or 4-wire RS485 with tri-state data interfaces
  • Exceeds all requirements for EIA RS-250C short-haul transmission: Extremely high video performance
  • Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
  • Ideally suited to networks requiring multiple physical layers where video degradation may be a problem
  • Compatible with all NTSC, PAL, or SECAM CCTV camera systems
  • Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
  • Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.
More details...
MSRP Price: $2,546.25
Online Price: $2,068.63
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

The ComNet FVT/FVR1014 video transmitter/data transceiver and video receiver/data transceiver series utilize 10-bit digital encoding and decoding for highquality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of one independent video channel and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.


Specifications


Video

  • Video Input - 1 volt pk-pk (75 ohms)
  • Overload - >1.5V pk-pk
  • # Input/Output Channels - 1
  • Bandwidth (minimum) - 10 Hz - 6.5 MHz per channel
  • Differential Gain - <2%
  • Differential Phase - <0.7°
  • Tilt - <1%
  • Signal-to-Noise Ratio (SNR) - 67 dB Typical
  • Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth

Data

  • Data Channels - 4
  • Data Interface - RS232, RS422 and RS485 (2W/4W)
  • Data Format - NRZ, NRZI, Manchester, Bi-Phase and Sensornet
  • Data Rate - DC-250 Kbps (NRZ)
  • Bit Error Rate - <1 in 10-9 @ Maximum Optical Loss Budget
  • Operating Mode - Simplex or Full-Duplex
  • Wavelength - 1310/1550 nm, Multimode and Single Mode
  • Number Of Fibers - 1

Led Indicators

  • Video Sync Presence for Each Video Channel
  • Received Data - Transmitted Data
  • Optical Carrier Detect
  • Optical Emitter - Laser Diode

Connectors

  • Optical - ST
  • Power - Terminal Block
  • Video - BNC (Gold Plated Center-Pin)
  • Data - RJ45 (5 pcs. Included)

Electrical & Mechanical

  • Power Surface Mount - 8-15 VDC @ 4W
  • Rack Mount - From Rack
  • Number of Rack Slots - 2
  • Current Protection - Automatic Resettable Solid-State Current Limiters
  • Circuit Board - Meets IPC Standard
  • Size (in./cm) (L×W×H) - 6.1 × 5.3 × 2.2 in., (15.5 × 13.5 × 5.6 cm)
  • Shipping Weight - <2 lb./0.9 kg

Environmental

  • MTBF - >100,000 hours
  • Operating Temp - -40° C to +75° C
  • Storage Temp - -40° C to +85° C
  • Relative Humidity - 0% to 95% (non-condensing)

FVT1014S1 Specifications PDF

FVT1014S1 Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In