The cart is empty.
Dealers. First. Always.
DWG

FVR4012M1 Comnet 4-Channel Digitally Encoded Video Receiver 2 Bi-directional Data Channels MM 1 Fiber

SKU: FVR4012M1
  • 10-bit digitally encoded video transmission: transmits 4 real-time color video signals and 2 bi-directional data signals on one optical fiber
  • Exceeds all requirements for RS-250C Short Haul transmission: high quality video performance
  • Supports RS 232, RS 422, and 2- or 4-wire RS 485
  • One bi-directional contact closure
  • Compatible with all NTS C, PAL, or SE CAM CCTV camera systems
  • Robust design ensures extremely high reliability in unconditioned out-of-plant environments
  • Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
  • Hot-swappable rack modules
More details...
MSRP Price: $5,576.00
Online Price: $4,530.50
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

The ComNet FVT/FVR4012(M)(S)1 Series transmits four (4) channels of video utilizing state of the art 10-bit digital encoding and decoding for very high quality video transmission, along with two (2) channels of bi-directional data and one (1) bi-directional contact closure over one single mode or multimode optical fiber. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The FVT/FVR4012 is compatible with NTS C, PAL and SE CAM video transmission protocols and supports bi-directional RS 232, 422 and 485 (2 & 4 Wire) data. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are required.
Bi-Color LED indicators are provided to indicate the status of the system, video and data. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate. No additional parts or power supplies are required.


Specifications


Video

  • Video Input - 1 volt pk-pk (75 ohms)
  • Overload - >1.5V pk-pk
  • # Input/Output Channels - 4
  • Bandwidth (minimum) - 10 Hz - 6.5 MHz per channel
  • Differential Gain - <2%
  • Differential Phase - <0.7˚
  • Tilt - <1%
  • Signal-to-Noise Ratio (SNR) - 67 dB Typical
  • Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth

Data

  • Data Channels - 2
  • Data Interface - RS232, RS422 and RS485 (2W/4W)
  • Data Format - NRZ, NRZI, Manchester, Bi-Phase and Sensornet
  • Data Rate - DC-250 Kbps (NRZ)
  • Bit Error Rate - <1 in 10-9 @ Maximum Optical Loss Budget
  • Operating Mode - Simplex or Full-Duplex

Contact Closure

  • Contact Interface Response Time - 0.5 msec
  • Input - Dry Contact Closure
  • Output - SPST Relay, 0.5A Contact Rating normally open
  • Wavelength - 1310/1550 nm, Multimode and Single Mode
  • Number Of Fibers - 1

Led Indicators

  • Video Sync Presence for Each Video Channel
  • Received Data - Transmitted Data
  • Optical Carrier Detect
  • Optical Emitter - Laser Diode

Connectors

  • Optical - ST
  • Power - Terminal Block
  • Video - BNC (Gold Plated Center-Pin)
  • Data - Terminal Block

Electical & Mechanical

  • Power Surface Mount - 8-15 VDC @ 4W
  • Rack Mount - From Rack
  • Number of Rack Slots - 2
  • Current Protection - Automatic Resettable Solid-State Current Limiters
  • Circuit Board - Meets IPC Standard
  • Size (in./cm) (L×W×H) - 6.1 × 5.3 × 3.3 in., 15.5 × 13.5 × 8.3 cm
  • Shipping Weight - <2 lb./0.9 kg

Environmental

  • MTBF - >100,000 hours
  • Operating Temp - -40˚ C to +75˚ C
  • Storage Temp - -40˚ C to +85˚ C
  • Relative Humidity - 0% to 95% (non-condensing)

FVR4012M1 Specifications PDF

FVR4012M1 Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In