FVT801M1 Comnet 8-Channel Digitally Encoded Video Transmitter MM 1 Fiber

The ComNet FVT/FVR801 video transmitter and video receiver series utilize 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of eight independent video channels over one optical fiber and are ideal for use in unconditioned roadside or out-ofplant installations. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rackmounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

Specifications

Video

• Input - 1 volt pk-pk (75 ohms)
• Overload - >1.5V pk-pk
• # Input/Output Channels - 8
• Bandwidth (minimum) - 10 Hz - 6.5 MHz per channel
• Differential Gain - <2%
• Differential Phase - <0.7˚
• Tilt - <1%
• Signal-to-Noise Ratio (SNR) - 67dB (Typical)
• Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
• Wavelength - 1310 nm/1550 nm, Multimode & Single Mode
• Number of Fibers - 1

Led Indicators

• Video Sync Presence for Each Video Channel
• Optical Carrier Detect - Power
• Optical Emitter - Laser Diode

Connectors

• Optical - ST
• Power - Terminal Block
• Video - BNC (Gold Plated Center-Pin)

Electrical & Mechnical

• Power Surface Mount - 8-15 VDC @ 4W
• Rack Mount - From Rack
• Number of Rack Slots - 2
• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size (in./cm) (L×W×H) - 6.1 × 5.3 × 2.2 in., (15.5 × 13.5 × 5.6 cm)
• Shipping Weight - <2 lb./0.9 kg

Environment

• MTBF - >100,000 hours
• Operating Temp - -40° C to +75° C
• Storage Temp - -40° C to +85° C
• Relative Humidity - 0% to 95% (non-condensing)

FVT801M1 Specifications PDF

FVT801M1 Manual