The cart is empty.
Dealers. First. Always.
DWG

FDC10M1A Comnet Bi-directional Contact Closure Transceiver MM 1 Fiber

SKU: FDC10M1A
  • Transmits a single contact closure in one or two directions
  • Distances up to 69 km (43 miles)
  • 30 VDC, 0.5 amp relay output, normally open
  • Point-to-Point transmission architecture
  • Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
  • Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments
  • Relay contact for Carrier Detect (normally closed with carrier present)
  • Automatic resettable solid-state current limiters
  • Voltage transient protection on all power and signal input/ output lines provides protection from power surges and other voltage transient events
More details...
MSRP Price: $756.00
Online Price: $614.50
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

The ComNet FDC10 Series bi-directional contact closure transceiver provides bi-directional transmission of contact closure over one multimode or single mode optical fiber. The transceiver has a contact input and a 0.5 amp contact output. The bi-directional contact closure module has two relay outputs and one relay input. One relay output follows the “relay input” at the remote end. When the remote “relay input” is shorted, the local relay output is closed and vice-versa. The second relay output is closed when “carrier” is detected from the remote end, this indicates that the optical fiber is connected and that the remote end has power and is operating.


Specifications


Contacts

  • Contact Interface - Response Time - 0.5 msec
  • Input - Dry Contact Closure
  • Output - SPST Relay, 30 VDC @ 0.5 A, Resistive loads only. 0.5 A Contact Rating - normally open
  • Wavelength - 1310/1550 nm
  • Number Of Fibers - 1

Connectors

  • Optical - ST
  • Contact and Power - Terminal Block

LED Indicators

  • Contact Relay
  • Carrier Detect

Power

  • Operating Voltage Range - 8 to 15 VDC
  • Power Consumption - 2 W Max

Electrical & Mechanical

  • Current Protection - Automatic Resettable Solid-State Current Limiters
  • Circuit Board - Meets IPC Standard
  • Size ComFit - 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
  • Surface Mount - 4.0 × 3.7 × 1.0 in (10.4 × 9.5 × 2.7 cm)
  • Shipping Weight - <1 lb./0.5 kg

Environmental

  • MTBF - >100,000 hours
  • Operating Temp - -40 ̊ C to +75 ̊ C
  • Storage Temp - -40 ̊ C to +85 ̊ C
  • Relative Humidity - 0% to 95% (non-condensing)¹

FDC10M1A Specifications PDF

FDC10M1A Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In