COMPAK11M Comnet Mini FVT/R11M Video, mm, 1 fiber

The ComNet FVT11M video mini-transmitter and FVR11M video mini-receiver supports transmission and reception of a fixed video signal using AM modulation on one multimode fiber optic cable. The FVT11M video transmitter is compatible with the FVR11M, FVR10M, FVR21, and FVR22 receivers. The FVR11M utilizes Automatic Gain Control (AGC) and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The transmitter and receiver incorporate bi-color (Red/ Green) indicating LED’s for monitoring proper system operation.

Specifications

Video

• Video Input TX - 1 volt pk-pk (75 ohms)
• Video Output RX - 1 volt pk-pk (AGC controlled)
• Bandwidth - 5 Hz - 10 MHz
• Differential Gain - <5%
• Differential Phase - <5°
• Tilt - <1%
• Signal-to-Noise Ratio (SNR) - 60 dB
• Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
• Wavelength - 850 nm, Multimode
• Number Of Fibers - 1

Connectors

• Optical - ST
• Power - Terminal Block
• Video - BNC (Gold Plated Center-Pin)
• Led Indicators - Video Present

Electrical & Mechanical

• Power TX - 8-15 VDC @ 80 mA
• Power RX - 8-15 VDC @ 60 mA
• Max. RG59 Cable Length - 750 ft.
• Circuit Board - Meets IPC Standard
• Size (in./cm) (L×W×H)
  • FVT11M Surface Mount - 2.3 × 1.6 × 1.1 in.,(5.7 × 4.1 × 2.8 cm)
  • FVR11M Surface Mount - 4.0 × 3.7 × 1.0 in., (10.4 × 9.5 × 2.7 cm)
• Shipping Weight - <2 lb./0.9 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40° C to +75° C
• Storage Temp - -40° C to +85° C
• Relative Humidity - 0% to 95% (non-condensing)

COMPAK11M Specifications PDF

COMPAK11M Manual