COMPAK15M2 Comnet FVT/R15M2 Video + Reverse Data, mm, 2 fiber

The ComNet FVT15M2 video transmitter/data receiver and the FVR15M2 video receiver/data transmitter support the simultaneous transmission of video and return data over two multimode optical fibers. These modules are universally compatible with all major CCTV camera manufacturers and supports RS232 and RS422 data interfaces and all major data protocols. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rackmounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

Specifications

Video

• Video Input - 1 volt pk-pk (75 ohms)
• Bandwidth - 5 Hz - 10 MHz
• Differential Gain - <5%
• Differential Phase - <5°
• Tilt - <1%
• Signal-to-Noise Ratio (SNR) - >55 dB @ 10 dB ATTN.
• Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth

Data

• Data Format - RS232, RS422,Manchester, bi-phase
• Data Rate - DC-115 Kbps (NRZ)
• Wavelength - 850 nm
• Numbers Of Fibers - 2

Led Indicators

• Video Present
• Transmit Data
• Receive Data

Connectors

• Optical - ST
• Power - Terminal Block
• Video - BNC (Gold Plated Center-Pin)
• Data - Terminal Block

Electrical & Mechanical

• Power
  • Surface Mount - 8-15 VDC @ 250 mA
  • Rack Mount - From Rack
• Number of Rack Slots - FVT - 1, FVR - 1
• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size (in./cm) (L×W×H) - 6.1 × 5.3 × 1.1 in., (15.5 × 13.5 × 2.8 cm)
• Shipping Weight - <4 lb./1.8 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40° C to +75° C
• Storage Temp - -40° C to +85° C
• Heat Generation - 10 BTU
• Relative Humidity - 0% to 95% (non-condensing)

COMPAK15M2 Specifications PDF

COMPAK15M2 Manual