CLESP Comnet CopperLine Surge Protector

The ComNet CopperLine CLESP provides highly effective voltage surge and transient protection for Ethernet-compatible equipment, including Ethernet switches, media converters, EoVDSL modems, ComNet CopperLine Ethernet over UT P transmission extenders, etc. The mating RJ-45 connector on the CLESP plugs directly into any 10/100/1000 BaseT Ethernet port, making the installation simple and quick. Protection is provided to IEC specification EN55024; Immunity Characteristics for Continuous and Transient, Conducted and Radiated Disturbances. Electrostatic discharge (ESD) protection is also provided. For maximum effectiveness, the grounding tab of the CLESP must be securely connected to the frame ground of the installation.

Specifications

Electrical

• Ethernet Interface - Standard 10/100/1000BaseT
• UTP - CopperLine Extended 10/100 Ethernet Cat 5 or higher
• Operating Power - No Power Required
• Status Indicating LEDs
  • Ethernet- Traffic
  • Link Extended Ethernet Traffic
• Connectors
  • Male RJ-45
  • Female RJ-45
• GND Connection - Via Metal Tab
• Standards Compatibility - IEEE 802.3af PoE, IEEE 802.3at PoE

Mechanical

• Size (H x W x L) - 0.55 × 0.63 × 1.1 in, (14 × 16 × 28 mm)
• Weight - 0.009 lbs (4 g)

Environmental

• Operating Temp - 40°C to +75°C
• Storage Temp - 40°C to +85°C
• Relative Humidity - 0 to 95%, non-condensing

Compliance

• Tested and Certified for - IEC 61000-4-2: ESD @ 15Kv (air), 8Kv (contact) EC 61000-4-5: Lighting @ 8/20us IEC 6100-4-2: 2006 EN55024
• Compliance Category - B
• Let through voltage1 - 5Kv (air) 8Kv (contact)

CLESP Specifications PDF