The cart is empty.
Dealers. First. Always.
DWG

[DISCONTINUED] CNGE2FE8MSPOE Comnet 2 Port 1000Mbps + 8 Port 100Mbps Managed Switch, Power Over Ethernet, Power Supply PS48VDC-5A recommended and sold seperately

SKU: CNGE2FE8MSPOE

  • Environmentally hardened for direct deployment in difficult unconditioned out-of-plant and roadside installations
  • Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and CALTRANS Traffic Signal Control Equipment Specifications
  • Extended ambient operating temperature range: -40˚ C to +75˚ C (Functional to 85ºC)
  • 10/100 BASE-TX and 100/1000 BASE-FX compatible
  • Uses SFP modules for fiber and connector type and distance
  • Redundant power supply compatibility reduces possibility of single-point-of-failure for highest possible reliability
  • IGMP Snooping V1/V2 for multicast filtering and IGMP Query V1/V2
  • Port based VLAN (IEEE 802.1Q)
More details...
MSRP Price: $2,312.00
DISCONTINUED
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

The ComNet CNGE2FE8MSPOE Managed Ethernet Switch provides eight (8) 10/100 BASE-TX ports and two (2) 10/100/1000TX or 100/1000FX combo ports. The CNGE2FE8MSPOE is environmentally hardened and designed for use in difficult environments, and is available for use with CAT-5e copper or optical transmission media. The 8 electrical ports support the 10/100 Mbps IEEE 802.3 protocol. It features auto-negotiating and auto-MDI/MDIX to assist installation. All 8 ports support IEEE 802.3af Power over Ethernet (PoE). Two ports are 10/100/1000 configurable for copper or fiber media by selected by optional SFP modules. These network managed layer 2 switches are optically (100/1000 BASE-FX) and electrically compatible with any IEEE 802.3 compliant Ethernet devices.


Specifications

  • Transfer Rate
    • 14,880pps for Ethernet port
    • 148,800pps for Fast Ethernet port
    • 1,488,000pps for Gigabit Fiber
    • Ethernet port
  • Packet Buffer- 1Mbits
  • Mac Address - 8K MAC address table
  • Flash ROM - 4Mbytes
  • DRAM - 32Mbytes
  • Connectors (Front)
    • 10/100TX - 8 × RJ45
    • 10/100/1000T and 100/1000FX Combo - 22 × RJ45 + 2 × SFP sockets
    • RS232 connector - RJ45 type
  • Network Cable
    • 10Base-T - 2-pair UTP/STP Cat. 3, 4, 5 cable. EIA/TIA-568 100-ohm (100m)
    • 100Base-TX - 2-pair UTP/STP Cat. 5/5E cable. EIA/TIA-568 100-ohm (100m)
    • 1000Base-TX - 2-pair UTP/STP Cat. 5e or 6 cable.
    • EIA/TIA-568 100-ohm (100m)
  • Optical Fiber - Requires selection of sold-separately SFP Modules. See ComNet data sheet“SFP Small Form-Factor Pluggable Modules” for number and description of SFP modules.
  • PoE pin assignment
    • RJ45 port #1 - #8 support IEEE 802.3af End-point, Alternative A mode. Per port provides 15.4 W ability
    • Positive (VCC+) - RJ45 pin 1, 2
    • Negative (VCC-) - RJ45 pin 3, 6
  • Protocol - CSMA/CDIndicating LEDs 10/100TX, Giga
  • Power
    • Power Supply
      • PoE - 48 to 56 VDC, Redundant power with removable terminal block for local andremote power
      • Non-PoE - 12to– 56 VDC
    • Power Consumption -136 Watts (Full load), 12 Watts without PoE
  • Electrical & Mechanical
    • Cooling Natural - convection.
    • Case - Metal case, IP-30
    • Size (W × D × H) - 2.84 × 4.13 × 5.98 in (7.2 × 10.5 × 15.2 cm)
    • Shipping Weight - <5 lbs / 2.3 kg
  • Installation - DIN Rail (35mm track) or Wall Mount
  • Environmental
    • MTBF - >100,000 hours
    • Operating Humidity - 5% to 95% (Non-condensing)
    • Operating Temperature - -40˚C to 75˚C (Functional to 85º C)
    • Storage Temperature - -40˚C to 85˚C

CNGE2FE8MSPOE Specifications PDF

CNGE2FE8MSPOE Installation Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In