CNGE2FE16MS Comnet 2 Port 1000Mbps +16 Port 100Mbps Managed Switch, Includes Power Supply

The ComNet CNGE2FE16MS Managed Ethernet Switch provides robust transmission of (16) 10/100 BASE-TX and (2) 10/100/1000TX or 100/1000FX combo ports of gigabit Ethernet data. Unlike most Ethernet switches, these environmentally hardened units are designed for direct deployment in difficult out-of-plant or roadside operating environments, and are available for use with either conventional CAT-5e copper or optical transmission media. Diverse media selection allows for easy implementation of point-to-point, linear add-drop, dropand-repeat, star, or true self-healing ring and mesh network system architectures. 2 ports are 10/100/1000 configurable for copper or fiber media for use with multimode or single mode optical fiber, selected by optional SFP* modules. These network managed layer 2 switches are optically (100/1000 BASE-FX) and electrically compatible with any IEEE 802.3 compliant Ethernet devices. Plug-andplay design ensures ease of installation, and no electrical or optical adjustments are ever required.

Specifications

• Ethernet
  • Transfer Rate
    • 14,880pps for Ethernet port
    • 148,800pps for Fast Ethernet port
    • 1,488,000pps for Gigabit Fiber
  • Ethernet port Packet Buffer - 1Mbits
  • Mac Address - 8K MAC address table
  • Flash ROM - 4Mbytes
  • DRAM - 32Mbytes
• Connectors
  • 10/100TX - 16 × RJ45
  • 10/100/1000TX/ SFP Combo - 2 × RJ45 + 2 × 100/1000 SFP sockets
  • RS232 connector - RJ45 type
• Network Cable
  • 10Base-T - 2-pair UTP/STP Cat. 3, 4, 5 cable. EIA/TIA-568 100-ohm (100m)
  • 100Base-TX - 2-pair UTP/STP Cat. 5/5E cable. EIA/TIA-568 100-ohm (100m)
  • 1000Base-TX - 2-pair UTP/STP Cat. 5e or 6 cable. EIA/TIA-568 100-ohm (100m)
• Optical Fiber
  • Multimode - 50/125μm - 62.5/125μm
  • Single Mode - 9/125μm
  • Requires selection of sold-separately SFP Modules. See ComNet data sheet “SFP Small Form-Factor Pluggable Modules” for number and description of SFP modules.
• Protocol - CSMA/CD
• LED
  • 16 x 10/100TX - Link/Activity (Green) Full Duplex/Collision (Yellow)
  • Giga Copper - Link/Activity (Green)
  • Speed - 1000Mbps (Green)
  • SFP - Link/Activity (Green) Power (Green), Power 1 (Green), Power 2 (Green), Fault (Red), Master (Green
• Power
  • Reserve Polarity Protection - Present
  • Overload Current Protection - Present
  • Power Supply - 12 - 48VDC, Redundant power with polarity reverse protect function and removable terminal block
  • Power Consumption - 10.6 W
• Mechanical
  • Case - Metal case. IP-30
  • Case Dimensions - 2.84 × 4.13 × 5.98 in (7.2 × 10.5 × 15.2 cm)
• Installation - DIN Rail (35mm track) or Wall Mount
• Environmental
  • MTBF - >220,000 hours
  • Operating Humidity - 5% to 95% (Non-condensing)
  • Operating Temperature - -40˚C to 75˚C, Functional to 85ºC
  • Storage Temperature - -40˚C – 85˚C
• Compliance
  • EMI - FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE EN61000-4-4 (EFT), CE EN61000-4-5 (Surge), CE EN55022, CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-6-2, CE N61000-6-4 IETF RFC
  • Compliance - RFC768-UDP, RFC783-TFTP, RFC791-IP RFC792-ICMP, RFC793-TCP, RFC827-ARP, RFC854-Telnet, RFC894-IP over Ethernet, RFC1112-IGMP v1, RFC1519-CIDR, RFC1541-DHCP (client), RFC2030-SNTP, FC2068-HTTP, RFC2236-IGMP v2, RFC2475-Differentiated Services, RFC2865-Radius, RFC3414-SNMPv3-USM, RFC3415-SNMPv3-VACM IETF SNMP MIBS RFC1493-BRIDGE-MIB, RFC1907-SNMPv2-MIB, RFC2012-TCP-MIB, RFC2013-UDP-MIB, RFC2578-SNMPv2- SMI, RFC2579-SNMPv2-TC, RFC2819- RMON-MIB, RFC2863-IF-MIB, draft-ietf-bridgerstppmib-03-BRIDGE-MIB, draft-ietf-bridgebridgemib-smiv2-03- RSTP-MIB, IANAifType-MIB
  • Safety - UL, cUL, CE/EN60950-1, UL 508 Class 1, Division 2, Groups A, B, C, & D for Hazardous Locations
  • Stability Testing - IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)

CNGE2FE16MS Specifications PDF

CNGE2FE16MS Installation Manual