Limited Time Only. Trade in any existing DVR for a cutting edge DVR / NVR with all latest features. CLICK HERE
DWG

Browse by Category




DL4100IC-3 Alarm Lock Electronic Digital Lock - Interchangeable core prepped for Best - Polished Brass Finish

SKU: DL4100IC-3
  • Field-proven, standalone rugged keyless locks with vandal-proof, allmetal keypad No wiring; long-life battery operation. (Key override with IC core option.)
  • Privacy" feature ideal for bathrooms, dressing rooms, etc. With the push of a button on the back of the lock (inner door), the lock cannot be opened from the front entry side.
  • LED indicator on front of the door will flash while privacy feature is active. Tri-colored LED indicator also shows code acceptance or denial (green or red, respectively), or low battery condition (yellow).
  • Programmable "Residency" feature allows users to close the door behind them and have the lock remain unlocked until it is physically relocked with PIN or Prox device.
  • Users are individually programmed to use a PIN or card only (PDLprox models), or for the highest security - both card and code.
  • 2000 3 to 6 digit user codes: Master; manager; supervisor; basic users. (PDL-Prox models support up to 2000 Prox. ID cards/fobs or codes.) One-time service codes. Total user lockout code. Keypad lockout after numerous attempts to "guess" codes.
  • Weatherproof for use inside and out even in weather extremes from -31 degrees below to 151degrees F on both sides of the door.
  • Fingertip (keypad) or Windows PC-programmable
More details...
MSRP Price: $1,119.00
Online Price: $683.00
Save to my Wish List

DWG Dealer Price : ---


Installers, Contractors, and Integrators - click here to set up your dealer account today.

Existing DWG Dealers - Log In to view your current dealer pricing.

Have questions or need a quote? Click here. for our Sales Inquiry Form.

DL4100IC-3 Alarm Lock Electronic Digital Lock - Interchangeable core prepped for Best - Polished Brass Finish
DL4100IC-3 Alarm Lock Electronic Digital Lock - Interchangeable core prepped for Best - Polished Brass Finish
Previous Item   Next Item
 
Product Details

Specifications


  • Operation - Authorized digital code or prox technology ID allows lever to retract latch. Inside lever is always in passage mode and permits instant egress.
  • Operating Temperature - Weather proof lock with operating range from -31 degrees below to 151 degrees F.
  • Keypad - Weather proof, all-metal, 12-button programmable formulti-level access functions. Proximity antenna housing molded of ultra high strength, impact resistant Lexan .
  • Programming - Locking modes, event schedules, group or individual user codes, master and management codes, passageand emergency or service code, lockout and remote over ride capability and allow able entry time (3, 10 or 15 seconds), etc. are programmable through the keypad, the AL-DTM (data transfermodule) or Alarm Lock DL – Windows PC Software.
  • Audit Trail - Lock’s activity log can be extracted by using the ALDTM(data transfer module), the AL-PCI (PC interface) and/or canbe on-site printed using the AL-IR1 (hand-held infrared printer)
  • Power - 5AA alkaline batteries, furnished. Audible low battery alert,visual and audible entry indicators; 60,000 cycles, typical.
  • Door Thickness - 1 5/8" to 1 7/8" standard. For 1 3/8" doors useS6072 spacers. For other thickness’, please consult factory.
  • Backset - 2 3/4" standard. 2 3/8" backset also available.
  • Door Prep - Standard ANSI A115 Series Prep modified by adding additional through-bolt holes.
  • Cylinder - Solid brass 6 pin tumbler cylinder keyed 5, SCI keyway,furnished in all K.O. models. Tailpieces for Schlage (HW580) & LoriHW620) cylinders (furnished). Standard IC core models accept Arrow , Best . Falcon , KSP and Kaba Peaks 6 or 7 pin IC corec ylinders (not furnished). Alarm Lock tailpiece for use with IC core cylinders is furnished. IC core models prepped for Yale , Medeco ,Corbin-Russwin , Sargent and Schlage also available.
  • Strike - 1 1/8" x 2 3/4" T strikestandard. With screws for woodor metal jambs. 1 1/4" x 4 7/8".ASA strike also included.
  • Finishes - US3 polished brass,US26D satin chrome, US26polished chrome, US5antique brass, plus specialorder finishes (including Durondic US1OB).
  • Compliances - Grade I heavyduty cylindrical lockset. ULlisted to the 1OC Positive Pressure Specification.

DL4100IC-3 Specifications PDF


Product Reviews

Write your own review

 

Rate this product: