CNFE1005POEM-M Comnet Commercial Grade 100Mbps Media Converter with 48V POE Mini

The ComNet CNFE100(X)POE/M Series media converters provide full-duplex fiber optic transmission of a single channel of 10/100 Mbps Ethernet data (10/100 BASE-TX) through multimode or single mode optical fiber. They provide full compliance with IEEE 802.3at as Power Sourcing Equipment (PSE), with a maximum power of 30 watts in Mode A or Mode B, making them ideal for those applications where the remote equipment draws significant power. A higher output 60 watt model is available. Mode A and mode B are selected by the media converter automatically. Plug-and-play design ensures ease of operation, and no optical adjustments are ever required.

Specifications

Data

• Data Interface - Ethernet
• Data Rate
  • 10/100 Mbps
  • IEEE 802.3 Compliant
  • Full Duplex or Half Duplex Electrical Port/Full Duplex Optical Port
• Fibers - ST, SC or SFP Dependent (Requires selection of sold-separately SFP modules. See ComNet data sheet for number and description of SFP module options.)

Connectors

• Optical - ST, SC or SFP
• Power - Terminal Block
• Electrical - RJ45
• PoE Pin Assignment - RJ-45 port supports IEEE802.3at End-point Positive (VCC+): RJ45 pin 1, 2 (RJ45 pin 1,2 and 4,5 on 60W ports) Negative (VCC-): RJ45 pin 3, 6 (RJ45 pin 3,6 and 7,8 on 60W ports)
• Max. PoE Current - 625 mA continuous per mode

Power

• Operating Voltage - 48 to 56 VDC
• Power Consumption - 1.35A Max
• Current Protection - Automatic Resettable Solid-State Current Limiters

Electrical & Mechanical

• LED Indicators - Optical Link/Data Activity, Power, PoE
• Circuit Board - Meets IPC Standard
• Size (L×W×H) - 4.0 × 3.7 × 1.0 in (10.4 × 9.5 × 2.7 cm)
• Shipping Weight - <1 lb / 0.5 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -4 0˚ C to +75˚ C
• Storage Temp - -40˚ C to +85˚ C
• Relative Humidity - 0% to 95% (non-condensing)

CNFE1005POEM-M Specifications PDF