EBRIDGE4CR Altronix IP Over Coax 4 Port Receiver

Altronix eBridge4CR IP over Coax receiver is designed for use with eBridge1CT to enable fast 10/100Base-T Ethernet digital communication over coax cable. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission is extended up to 700m (over five times the 100m Ethernet maximum length), eliminating the need for repeaters. eBridge units transmit Composite Video Signal with Ethernet data simultaneously.

Specifications

Input

• Voltage - 24VDC to 56VDC UL Listed Class 2 power supply (polarity not observed) or UL Listed 24VAC Class 2 plug-in transformer
• Power Consumption (under maximum load) - 24VDC/440mA, 56VDC/220mA, 24VAC/800mA

Ethernet

• Four (4) ports
• Connectivity: RJ45, auto- crossover
• Wire type: 4-pair CAT5 or better structured cable
• Distance: up to 100m

Coax

• Throughput is rated to pass 25Mbps of data at distances up to 500m
• With proper headend equipment multiple Megapixel cameras can be used
• Speed: 10/100BaseT, half/full duplex, auto negotiation
• Connectivity: BNC, RG-59/U or similar

Indicators (LED)

• Blue LED - Coax link connection
• Green LED - Power
• Yellow and Green LED (by RJ45 jack) - IP Link status, 10/100Base-T/active

Agency Listings

• UL/cUL - UL 60950-1 (Information Technology Equipment)
• CE C-Tick compliant - European Conformity

Physical and Environmental

• Dimensions (W x L x H) - 5.25” x 9.25” x 1.7” (133.4mm x 235mm 43.8mm)
• Weight (approx.)
• Product Weight - 2.9 lbs. (1.32 kg)
• Shipping Weight - 3.9 lbs. (1.77 kg)
• Operating Temperature - -10ºC to 50ºC (14ºF to 122ºF)
• Storage Temperature - -30ºC to 70ºC (-22ºF to 158ºF)
• Relative Humidity - 85% +/-5%
• Operating Altitude - -304.8 to 2,000m
• BTU/Hr. (approx.) - 24VDC - 5, 56VDC - 6, 24VAC - 10

EBRIDGE4CR Specifications PDF

EBRIDGE4CR Manual