POE31U-1AT Phihong IEEE802.3at Compliant Power Injector

SKU: POE31U-1AT

MSRP Price: $76.00

Online Price: $76.00

Product Details

Specifications

Input

AC Input Voltage Rating - 100 to 240VAC
AC Input Voltage Range - 90 to 264VAC
AC Input Current
- 0.8A (RMS) maximum for 120VAC
- 0.55A (RMS) maximum for 240VAC
AC Input Frequency - 47-63Hz
Leakage Current
- 350uA maximum for U models
- 250uA maximum for W models
Max In-rush Current - 60A maximum at 240VAC and maximum load (Cold Start at ambient 25°C)

Output

Output Power - 30W
Hold-up time - 10mSec minimum at maximum load at 120VAC, 60Hz
Transient O/P Voltage Protection - 60V maximum at switch on/off at any AC line phase
Efficiency - 80% Typical at maximum load at 120VAC, 60Hz

Environmental

Operating Temperature - 0 to +40°C
Non-operating Temperature - -20 to +65°C
Relative Humidity - 5 to 90%
EMC
- EN55022 Class B
- FCC Part 15 Class B
EMC
- ESD - EN61000-4-2. Level 3
- RS - EN61000-4-3. Level 3
- EFT/Burst - EN61000-4-4. Level 2
- Surge - EN61000-4-5. Level 3
- CS - EN61000-4-6. Level 3
- Voltage Dips - EN61000-4-11
- Harmonic - EN61000-3-2 Class A
Isolation (HI-POT)
- Primary to Secondary - 1500VAC for 1 minute, 10mA
Insulation Resistance
- Primary to Secondary - 10M Ohm 500VDC

Feature

Cisco
- No extern parts required for Legacy devices
  - VoIP Phones - 7910, 7912, 7940, 7960
  - Access Points - 1040, 1140, 1250, 1260, 3500
Over Voltage/Current, Short Circuit Protection - The output is equipped with short circuit protection and overload protection as per IEEE802.3af specifications and conforms to UL60950-2. The output can be shorted permanently without damage.
Indicator
- Solid Green - Valid IEEE802.3af load detected and connected “ON”
- Blinking Green - Power “ON” ready for connection
- Blinking Red/Green - Invalid load connected
- Blinking Red - fault
AC Input Connector
- IEC320 C14 - U Models – three wire
- IEC320 C8 – W Models – two wire
Output Connection - +pins 3,6 / -pins 1,2
Data IN/POE OUT Connector - RJ45
Warranty - 1 Year

Help