Dealers. First. Always.       |      The professional integrators favorite security distributor for over 20 years and counting.
DWG



Popular Everyday Products

POE31W-1AT Phihong IEEE802.3at Compliant Power Injector

SKU: POE31W-1AT
  • Compliant with IEEE802.3at Standard
  • Non-vented Case
  • Full Protection OVP, OCP
  • Cisco AP1250 Full Power Support
  • Limited Power Source
  • Gigabit Compatible
  • 1 Year Warranty
More details...
MSRP Price: $76.00


DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



POE31W-1AT Phihong IEEE802.3at Compliant Power Injector
POE31W-1AT Phihong IEEE802.3at Compliant Power Injector
Previous Item   Next Item
 
Product Details

Specifications


Input

  • AC Input Voltage Rating - 100 to 240VAC
  • AC Input Voltage Range - 90 to 264VAC
  • AC Input Current
    • 0.8A (RMS) maximum for 120VAC
    • 0.55A (RMS) maximum for 240VAC
  • AC Input Frequency - 47-63Hz
  • Leakage Current
    • 350uA maximum for U models
    • 250uA maximum for W models
  • Max In-rush Current - 60A maximum at 240VAC and maximum load (Cold Start at ambient 25C)

Output

  • Output Power - 30W
  • Hold-up time - 10mSec minimum at maximum load at 120VAC, 60Hz
  • Transient O/P Voltage Protection - 60V maximum at switch on/off at any AC line phase
  • Efficiency - 80% Typical at maximum load at 120VAC, 60Hz

Environmental

  • Operating Temperature - 0 to +40C
  • Non-operating Temperature - -20 to +65C
  • Relative Humidity - 5 to 90%
  • EMC
    • EN55022 Class B
    • FCC Part 15 Class B
  • EMC
    • ESD - EN61000-4-2. Level 3
    • RS - EN61000-4-3. Level 3
    • EFT/Burst - EN61000-4-4. Level 2
    • Surge - EN61000-4-5. Level 3
    • CS - EN61000-4-6. Level 3
    • Voltage Dips - EN61000-4-11
    • Harmonic - EN61000-3-2 Class A
  • Isolation (HI-POT)
    • Primary to Secondary - 1500VAC for 1 minute, 10mA
  • Insulation Resistance
    • Primary to Secondary - 10M Ohm 500VDC

Feature

  • Cisco
    • No extern parts required for Legacy devices
      • VoIP Phones - 7910, 7912, 7940, 7960
      • Access Points - 1040, 1140, 1250, 1260, 3500
  • Over Voltage/Current, Short Circuit Protection - The output is equipped with short circuit protection and overload protection as per IEEE802.3af specifications and conforms to UL60950-2. The output can be shorted permanently without damage.
  • Indicator
    • Solid Green - Valid IEEE802.3af load detected and connected ON
    • Blinking Green - Power ON ready for connection
    • Blinking Red/Green - Invalid load connected
    • Blinking Red - fault
  • AC Input Connector
    • IEC320 C14 - U Models three wire
    • IEC320 C8 W Models two wire
  • Output Connection - +pins 3,6 / -pins 1,2
  • Data IN/POE OUT Connector - RJ45
  • Warranty - 1 Year

POE31W-1AT Specifications PDF


Product Reviews

Write your own review

 

Rate this product: