The cart is empty.
Dealers. First. Always.
DWG

POE806U-24AT-N Phihong Ultra PoE 24 Ports - 33.4W per port with SNMP

SKU: POE806U-24AT-N
  • Compliant with the IEEE802.3at Standard
  • 2 finger classification
  • SNMP Management Option
  • Windows GUI
  • May power Cisco AP1250 using the ACCY125X dongle
  • Full Power of 576W—33.6W per Port, No Power Management required
  • Full Protection OTP, OCP, OVP
  • SSL available with SNMPv3
More details...
MSRP Price: $1,812.00
Online Price: $1,812.00
Save to my Wish List
Product Details

Specifications


Input

  • AC Input
    • Voltage Range - 90 to 264VAC
    • Input Frequency - 47-63Hz
  • Input Current
    • 12.0A (RMS) maximum for 90VAC
    • 10.0A (RMS) maximum for 230VAC
  • Leakage Current - 3.5mA maximum @ 264VAC 60Hz
  • AC Inrush Current
    • 30A (RMS) maximum for 115VAC
    • 60A (RMS) maximum for 230VAC

Output

  • Total Output Power
    • 33.6W per port
    • Total Power 806W
  • Ripple and Regulation - 100mV maximum
  • Efficiency - 75% (typical) at maximum load, and 120VAC 60Hz
  • Hold-up Time - 16mS min. 120VAC and maximum load
  • Transient O/P Voltage Protection - 60V maximum at switch on and off at any AC line Phase
  • Turn-On Delay Time - 20 sec maximum at maximum load, and 120VAC 60Hz, 60Hz

Environmental

  • Temperature
    • Operation - 0 to +40°C
    • Non-operation - -25 to +65°C
  • Humidity
    • Operation - 5 to 90%
    • Non-Operation - 5 to 90%
  • EMC
    • EN55022 Class A, FCC Class A with UTP cabling
    • EN55022 Class B, FCC Class B with FTP cabling
  • Isolation Test
    • Primary to Secondary - 4242VDC for 1 minute
    • Primary to Ground - 2121VDC for 1 minute
    • Secondary to Ground - 2121VDC for 1 minute
  • Immunity EN50082-1
    • ESD - EN61000-4-2. Level 3
    • RS - EN61000-4-3. Level 2
    • EFT - EN61000-4-4. Level 2
    • Surge - EN61000-4-5. Level 3
    • CS - EN61000-4-6. Level 2
    • Voltage Dips - EN61000-4-11
    • Harmonic - EN61000-3-2 Class A
  • Isolation
    • Primary to Secondary - 10 OHM 500VDC
    • Primary to Field Ground - 10 OHM 500VDC

Feature

  • Cisco
    • No extern parts required for Legacy devices
      • VoIP Phones - 7910, 7912, 7940, 7960
      • Access Points - 1040, 1140, 1260, 3500
  • Over Voltage/Current, Short Circuit Protection
    • Outputs equipped with short circuit protection and overload protection as per 802.3at specifications
    • The output can be shorted permanently without damage
  • Over Temperature Protection - Automatic Shutdown without damage
  • Indicators
    • Green LED - Power detected “CONNECT”
    • Flashing GREEN - IEEE802.3af detected “CONNECT” at 33.6
    • Yellow LED - Fault detected
    • USB Diagnostics Port and NIC Interface
      • USB “B” port for diagnostics and manual port control Windows GUI
      • NIC interface for remote management via secure IP access
    • Input Connector - AC Input IEC320 C14
    • Warranty - Limited Lifetime

POE806U-24AT-N Specifications PDF


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In