The cart is empty.
Dealers. First. Always.
DWG

POE33U-560DO Phihong Passive PoE Adapter Gigabit Dual Output

SKU: POE33U-560DO
  • SELV Compliant
  • Gigabit Compatible
  • Dual Output
  • Waterproof IP67 Rating
  • Wide Operate Temperature Range
  • No Detection Passive Injector
  • Full Protection OCP, OVP
  • 1 Year Warranty
More details...
MSRP Price: $524.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

Specifications


Input

  • AC Input Voltage Range - 90 to 264VAC
  • AC Input Voltage Rating - 100 to 240VAC
  • AC Input Current
    • 2.0A (RMS) and 90VAC at maximum load
    • 1.2A (RMS) and 240VAC at maximum load
  • AC Input Frequency - 47 to 63Hz
  • Leakage Current - 3.5mA for 254VAC, 50Hz
  • Max Inrush Current
    • 30A for 115VAC at maximum load
    • 60A for 240VAC at maximum load

Output

  • Total Output Power - 16.8W per port, 33.6W total power
  • Ripple and Noise (Vp-p) - 250mV maximum
  • Efficiency - 70% (typical) at maximum load, and 120VAC 60Hz

Environmental

  • Temperature
    • Operation - -40 to +60°C
    • Non-operation - -40 to +85°C
  • Humidity
    • Operation - 5 to 90%
  • EMI
    • FCC Part 15 Class B
    • EN55022 Class B
  • Isolation Test
    • Primary to Secondary - 4242 VDC for 1 minute, 10mA
    • Primary to Ground - 2121 VDC for 1 minute, 10mA
    • Secondary to Ground - 2121 VDC for 1 minute
  • Immunity
    • ESD - IEC61000-4-2 Level 3
    • RS - IEC61000-4-3 Level 3
    • EFT - IEC61000-4-4 Level 2
    • Surge - IEC61000-4-5 Level 3
    • CS - IEC61000-4-6 Level 3
    • Voltage Dips - IEC61000-4-11
    • Harmonic - EN61000-3-2 Class A
  • Insulation Resistance
    • Primary to Secondary - >10M OHM 500VDC
    • Primary to Ground - >10M OHM 500VDC

Feature

  • Short Circuit Protection - The output can be shorted permanently without damage
  • Indicators
    • Green LED - Input power “ON”
  • AC Input Connector - 3 pin terminal block with M3.5 screw terminal; for appropriate connection use minimum 14AWG wire and M3.5 spade lug
  • Output PoE Connectors - RJ45
  • Output PoE Connection
    • Port 1 - +pins 4,5 / -pins 7,8
    • Port 2 - +pins 3,6 / -pins 1,2
  • Input/Output Case Ports - 3 ¾ NPT holes compatible with standard ¾ NPT conduit piping or Phihong wire gland PGLAND750 with fully waterproof AC and RJ45 cables.
  • Network Switch - Network Switch must be Environment Rated B as per paragraph 33.4.1.1 of the IEEE802.3at standard.
  • Warranty - 1 Year

POE33U-560DO Specifications PDF


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In