POE61W-560DG Phihong Passive PoE Adapter Gigabit

Specifications

Input

• AC Input Voltage Range - 90 to 264VAC
• AC Input Voltage Rating - 100 to 240VAC, 47-63Hz
• AC Input Current
  • 2.0A (RMS) maximum for 90VAC
  • 2.0A (RMS) maximum for 90VAC
• Leakage Current
  • 0.25mA maximum for 264VAC, 50Hz (U Models)
  • 0.25mA maximum fro 264VAC, 50Hz (W models)
• AC Inrush Current
  • 30A maximum for 115VAC
  • 60A maximum for 230VAC (at cold start, 25°C)

Output

• Total Output Power - 60W
• Output Ripple - 250mVp-p
• DC Offset - No data degradation with DC imbalance 18mA
• Efficiency - Meets Level V Requirements; 87% minimum
• Hold-up Time - 10mS min. 120VAC and maximum load

Environmental

• Temperature
  • Operation - 0 to +40°C
  • Non-operation - -20 to +65°C
• Humidity
  • Operation - 5 to 90%
• EMI
  • FCC Part 15 Class A
  • EN55022 Class A
• Isolation Test
  • Primary to Secondary - 4242 VDC for 1 minute, 10mA
  • Primary to F.G - 2121 VDC for 1 minute, 10mA
  • Secondary to F.G - 2121 VDC for 1 minute
• Immunity
  • ESD - EN61000-4-2. Level 3
  • RS - EN61000-4-3. Level 2
  • EFT - EN61000-4-4. Level 2
  • Surge - EN61000-4-5. Level 3
  • CS - EN61000-4-6. Level 2
  • Voltage Dips - EN61000-4-11
  • Harmonic - EN61000-3-2 Class A
• Insulation Resistance
  • Primary to Secondary - >10M OHM 500VDC
  • Primary to Ground - >10M OHM 500VDC

Feature

• Over Voltage/Current, Short Circuit Protection
  • Outputs equipped with short circuit protection and overload protection.
  • The output can be shorted permanently without damage
• Input Connector
  • IEC320 C14 for U Models
  • IEC320 C8 for W Models
• Output Connection
  • 4-pair powering for Gigabit models - Pins 3,6, 4,5(+) Pins 1,2, 7,8 (-)
  • 2-pair powering for non-gigabit models - Pins 4,5(+) Pins 7,8 (-)
• Warranty - 1 Year

POE61W-560DG Specifications PDF