POE30S-1ATG Phihong PoE Extender Ultra POE Gigabit switch

Specifications

Input

• Input Source - Receives power from Ultra PoE Midspan
• Input Detection - 12.5K Detection
• DC Input Voltage Range - 50VDC to 57VDC
• DC Input Current - 1.6A at 57VDC and maximum load

Output

• Total Output Power - 30W with Ultra PoE Input
• Ripple and Noise (Vp-p) - 250mV maximum
• Output Detection - 25K Detection IEEE802.3at compliance
• Efficiency - 75% minimum at maximum load

Environmental

• Operating Temperature - 0 to 40°C
• Operating Temperature - 0 to 55°C
• Storage Temperature - -25 to +65°C
• Humidity - 5 to 90%
• EMI - EN55022 Class A, FCC part 15 Class A
• Warranty - 1 Year
• Immunity
  • ESD - EN61000-4-2 Level 3
  • RS - EN61000-4-3 Level 3
  • Surge - EN61000-4-5 Level 2
• Isolation (HI-POT) - 2121VDC for 1 min, 10mA
• Insulation Resistance
  • Input to Ground - >10M OHM 500VDC
  • Output to Ground - >10M OHM 500VDC

Features

• Over Current Protection
  • For PoE Class 0-3 Detection on Output - 450mA maximum
  • For PoE Class 4 Detection on Output - 650mA maximum
• Short Circuit Protection - Outputs equipped with short circuit protection The output can be shorted permanently without damage
• Indicators Ethernet IN/OUT
  • Green LED1 and LED2 - 10Mb Activity
  • Green LED1 - 100Mb Activity
  • Green LED2 - 1Gb Activity
  • Orange LED3 - Link Activity
• POE
  • Blinking GREEN - Unit is ON Active with No Load
  • Solid GREEN - Unit has detected a valid IEEE802.3at load
  • Blinking RED/GREEN - unit has detected an invalid load
  • Solid RED - unit is in over-load condition
• Input/Output Connectors - RJ45
• Input Connection - Pins - 1,2 7,8 GND / Pins - 3,6 4,5 +VIN
• Output Connection - Pins - 1,2 GND / Pins - 3,6 +VIN

POE30S-1ATG Specifications PDF