NXM1K1050 Videotec Housing For Installation in Aggressive Environments w/ Sunshield and Double Heater 110VAC/230VAC 80W

The NXM housing, entirely constructed from AISI 316L electropolished stainless steel, is designed to operate in special environments such as marine, industrial, chemical and where the external conditions are highly corrosive. In order to prevent the formation of dust deposit, the housing can be equipped with a flange designed to create an air barrier in front of the glass. The air, normally drawn from a compressor, can be purified by the optional filter group. A wide range of accessories for mounting the equipment is available thereby satisfying all installation needs.

The NXM housing can be installed on NXPTH Pan & Tilt head, to obtain a complete positioning system.

• Entirely constructed from AISI 316L electropolished stainless steel
  
• Cylindrical body enclosed by two 9mm-thick circular flanges
  
• 2 PG13,5 cable glands nickel-plated brass for external connections
  
• IP66/IP68, submersible down to -50m (-130ft), equal to 5 BAR max pressure
  
• Accessories available: heater kit and double power heater (for temperature down to -40°C (-40°F), camera power supply, air barrier + filtering group, wiper and washer
  
• Internal usable area (WxHxL): 88x86x334mm (3.5x3.4x13.1in)

Specifications

GENERAL

• Constructed from electropolished stainless steel (austenitic alloy stainless steel, corrosion
  and heat resistant according to the following standards):
  
• AISI 316L
  
• UNI 6900-71: X 2 Cr Ni Mo 17 12 2
  
• DIN 17006: X 2 Cr Ni Mo 17 13 2
  
• N° werkstoff 1.4404
  
• AFNOR: Z2 CND 17-12
  
• BSI: 316S11
  
• The screws utilised are in austenitic alloy stainless steel, corrosion and heat resistant
  according to the following standards:
  
• UNI 6900: X 5 Cr Ni Mo 1712
  
• AISI: 316
  
• ISO quality: A4
  
• Resistance class ISO: 80
  
• UNI: Ente Nazionale Italiano di Unificazione, AISI: American Iron and Standard Institute,
• DIN: Deutsche Industrie Normen, AFNOR: Association Française de Normalisation, BSI: British Standard Institution, ISO: International Organization for Standardization.

MECHANICAL

• Cable glands: 2xPG13.5 (nickel-plated brass for external connections)
  
• Flange thickness: 9mm (front/back)
  
• External body polishing
  
• Gaskets: High sealing O-ring
  
• Tempered window glass: Thick: 4mm (0.15in) thick, internal Ø 97mm (3.8in); external Ø
  112mm (4.4in); with air barrier internal Ø 95mm (3.7in), external Ø 116mm (4.6in)
  
• External dimensions: Ø 154mm (6in) length 370mm
  
• Internal usable area (WxH): 88x86mm (3.5x3.4in)
  
• Internal usable area with double heater (WxH): 55x100mm (2.2x3.9in)
  
• Internal usable length (without accessories):
  
• NXM 334mm (13.1in)
  
• Internal usable length (with heater and/or power supply): 245mm (9.6in)
  
• Unit weight:6kg (13.3lb)

ELECTRICAL

• Heating (Ton 15°C±3°C (59°F ±5°F), Toff 22°C±3°C (77°F±5°F))
  
• Power supply/Consumption: IN 12Vdc/24Vac, 20W max
  
• Power supply/Consumption: IN 120/230Vac, 40W max,80W max (double heater)
  
• Camera power supply
  
• IN 100-240Vac - OUT 12Vdc, 50/60Hz, 1A
  
• IN 230Vac - OUT 24Vac, 50/60Hz, 400mA

ENVIRONMENT

• Indoor/Outdoor
  
• Submersible up to -50m (-164ft) (5 Bar pressure)
  
• Operating temperature with heating: -20°C / +60°C (-4°F / +140°F)
  
• Operating temperature with double heater: -40°C / +60°C (-40°F / +140°F)

CERTIFICATIONS

• CE EN61000-6-3, EN60065, EN50130-4
  
• IP66/IP68 EN60529(5 Bar for 48 hours)
  
  

NXM1K1050 Specifications PDF