PB-IN50HF TAKEX 165'/330' Intelligent Double Modulated Quad Beam 4 Selectable Transmission Frequencies

The PB-IN-HF series is the flagship of the TAKEX range of infrared photoelectric beams. By synchronizing 16 beam paths between Transmitter and Receiver, the PB-IN-HF series offer unrivaled stability in perimeter security. Coupled with channel separation and environmental (anti-fog) circuitry, the PB-IN-HF series has earned worldwide recognition as the standard our rivals aspire to

• 4 Synchronised High-Power Beams
• Selectable 4-Channel Beam Frequencies
• Double Modulated Beam for unsurpassed Light Immunity
• Monitor Jack for alignment with Multi-Meter
• Audible Alignment Tone
• Environmental (anti-fog) Monitoring Circuit
• Dynamic A.G.C. Circuit
• Frost Resistant Cover

• Product type - Photoelectric Beam Sensor
• Detection system - Simultaneous breaking of 4 beams
• Infrared beam - LED pulsed beam, Double modulation
• Protection distance - Outdoor 50m (165ft) or less
• Indoor - 100m (330ft) or less
• Max. beam range - Outdoor 500m (1650ft) or less, Indoor 500m (1650ft) or less
• Response time - 50msec. to 700msec. variable (Standard : 50msec.)
• Supply voltage - 12V to 30VDC (Non-polarity)
• Current consumption - 60mA or less at protection
• Alarm output
• Dry contact relay output 1c
• Reset : Interruption time + off delay
• Contact capacity : 30V AC/DC, 1A or less
• Environmental output
• Dry contact relay output 1a or 1b (selectable)
• Action : Output when weather conditions worsen
• Contact capacity : 30V AC/DC, 1A or less
• Tamper output
• Dry contact relay 1b
• Action : Activated when cover is detached
• Contact capacity : 30V AC/DC, 1A or less
• Alarm LED - Red LED (Receiver) ON : when an alarm is initiated.
• Attenuation LED - Red LED (Receiver) ON : when beam is attenuated.
• Functions
• Modulated beam frequency selection (4-Channel)
• Environmental module
• Beam power selection
• Alarm memory indication
• Programmed AGC
• Auto-gain lock function
• Sound check : Audible check of beam level
• Monitor jack output
• Frost proof cover
• Ambient temperature range - -35°C to +66°C (-31°F to +151°F)
• Mounting positions - Outdoor (Perimeter protection)
• Wiring - Terminals
• Weight - Transmitter : 1200g (42oz) Receiver : 1300g (45.5oz)
• Appearance - PC resin (wine red)

PB-IN50HF Specifications PDF