[DISCONTINUED] DXS-23 Linear Supervised 3-Button, 4-Channel Handheld Transmitter

The Model DXS-23 Supervised 3-Button, 4-Channel Handheld Transmitter is a supervised, digitally coded radio transmitter designed for use with Linear’s DX and DXS Format receivers. Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver. To send a complete signal, press the transmitter button for a minimum of 2 seconds. The top button can be hidden with the top button cover supplied.
The DXS-23 is a three-button, four-code transmitter. Pressing either of the transmitter’s front buttons sends codes one and two. Pressing the small button on the transmitter’s top sends code three. Pressing both front buttons together sends code four.
The DXS-23 is supervised for low battery and sends hourly status reports. Some receivers are able to use these signals, others are not. Receivers must be programmed to the transmitter code before system testing and operation. Refer to the receiver’s instructions for details on operation and programming.

Specifications

• Power - Two 3V 2032 lithium batteries (supplied)
• Current Consumption
  • Standby - µA
  • Alarm - 8 mA average while transmitting
• Battery Life - Five years (typical)
• Measured Range - 1,500 feet minimum, open air (four quadrant test into DXSR-1504)
• Channels - 4 channels - top, left, right or left and right simultaneously (fail-safe mode)
• Operating Frequency - 315 MHz
• Dimensions - 1.6" W x 4.2" H x 0.8" D (41 x 107 x 20 mm)

DXS-23 Installation Manual