ETP-400KV-MOD Talk-A-Phone ADA Compliant Hands-Free Indoor/Outdoor Keypad Emergency Phone Flush Mounted with Voice Location Identifier No Faceplate

The ETP-400KV is an outdoor-rated, ADA-compliant hands-free Emergency Phone with Keypad that includes the capability to record a message identifying the location of the call.
The ETP-400KV is available in versions that can replace call boxes made by virtually any other manufacturer.
Talk-A-Phone's ETP-400KV Emergency Phone with Keypad is phone line powered and can be used on a POTS line, PBX extension, or with an EC-8 Emergency Phone Consolidator.

Specifications

• Construction - 12 gauge (2.8mm) #4 brushed stainless steel face plate
• Dimensions
  • Front Panel - 9.5(241) W x 11.75(298) H in(mm)
  • Wall Opening - 6.63(168) W x 9.75(248) H x 2.5(64) D in(mm)
• Weight - 8 lbs. (3.6kg)
• Operating Temperature - -4ºF to +149ºF (-20ºC to +65ºC
• Mounting - Flush mounts (surface mount options available)
• Communication - 2-way hands-free communication
• Digit Capacity - Up to 18 digits, including pauses, for each of two phone numbers (top button)
• Dialing Speed - Approximately 10 tones per second
• Power Source - Phone line powered (requires 20mA at 24 v off-hook)
• Connection - Parallel tip and ring connected to RJ11 connector for quick installation
• Circuit Protection - Varistor lightening suppressed and full wave polarity guarded
• Programming - Non-volatile EEPROM programming can be done from any telephone.
• "On Time" - Programmable from 1-4270 minutes in 1 minute increments.
• Wiring Requirements - 1 twisted-shielded pair
• Compliance - CSA Certified to UL Standard 60950

ETP-400KV-MOD Specifications PDF