PIR-T15WE-G TAKEX 50' Outdoor PIR High Mount Up to 20ft Selectable Pet Immunity Tripple Pyroelectric & Mirror Optics 9-28VDC - Grey

Precision triple mirror optics and intelligent signal processing ensure accurate detection from a mounting height of 2m to 6m.

Specifications

• Model - Triple mirror passive sensor
• Model number - PIR-T15WE（W）
• Detection system - Passive infrared
• Detection area - Wide angle (80°) detection Detection distance: 49’(15m), 108 rays (54 pairs)
• Power supply -9 to 28V DC (non-polarity)
• Current consumption - Max. 40mA
• Alarm output - Contact method : Dry semi-conductor contact, N.C./N.O. selectable, Contact operation : One-shot operation when detecting intrusion, Continuous output in the event of cover monitor error, Continuous output in the event of alignment position error, Continuous output in the event of self diagnosis error, Continuous output in the event of power voltage error, Continuous output in the event of long-term diagnosis error, Contact rating : 24V (AC/DC) 0.25A (resistive load) 　　　　　　　　　(built-in contact protective resistor 3.3Ω)
• External output - Contact method : Dry semi-conductor contact N.O. Contact operation : One-shot operation/Off delay operation selectable when detecting intrusion Contact rating : 24V (AC/DC) 0.25A (resistive load) (built-in contact protective resistor 3.3Ω)
• Tamper output - Contact method : Dry mechanical contact, N.C. Contact operation : Continuous output Contact rating : 24V (AC/DC) 0.1A (resistive load) (built-in contact protective resistor 3.3Ω)
• Alarm LED - Red LED : Blinks* during warm up Lights up* when detecting intrusion Continuously blinks in the event of cover monitor error Continuously lit in the event of alignment position error Continuously blinks in the event of self diagnosis error Continuously lit in the event of power voltage error Continuously blinks in the event of long-term diagnosis error (*ON/OFF selectable using the mode selector)
• Memory LED - Red LED : Blinks for 3 minutes during memory display, Auto reset operation either of continuous lighting for 47 minutes or blinking for 50 minutes selectable (Blinks to lights/blinks, ON/OFF selectable using the mode selector)
• Functions - Sensitivity selection, Operation mode selection, Alarm memory LED, Selfdiagnosis, Low voltage monitoring, Temperature compensation, Tamper, LED area checker, Environmental adjustment ,Creep zone detection, Walk test mode, Near area cancellation, Long-term diagnosis
• Mounting positions - 6.6’ to 20’(2.0 to 6.0m) (varies depending on the operation mode) • Low position mode : 6.6’ to 9’(2.0 to 2.7m) • High position mode : 9’ to 11.5’(2.7 to 3.5m) • Pet mode : 8.3’ to 10’(2.5 to 3.0m) • High density mode : 6.6’ to 20’(2.0 to 6.0m)
• Area angle adjustment range - Horizontal direction : 90° (by 5°pitch) Vertical direction : 17° (no stage adjustment)
• Ambient temperature range - 25～＋55℃(no c－ondensation and freezing)
• Installation place - Indoor/outdoor wall surface * Can be mounted on poles and ceilings (or under eaves) using optional accessories
• IP rating - IP55
• Connections - Terminals (M2.6 self up terminal)
• Weight - Approx. 600g
• Appearance - Body: ASA resin (gray), Window: PE resin (white)

PIR-T15WE-G Specifications PDF