[DISCONTINUED] VIP-X1XF-E BOSCH Single-channel Video Encoder

Specifications

Electrical

• Power supply - Via external unit
• Input voltage - 12 VDC
• Current consumption - 0.30 A max
• Power consumption - Approx. 3.6 W

Input/output

• Video - 1 x input
• Connector - BNC
• Impedance - 75 ohm, switchable
• Signal - Analog composite, 0.7 to 1.2 Vpp, NTSC or PAL

Audio

• Connector - 3.5 mm stereo jack
• Signal line in - 9 kohm typical, 5.5 Vpp max
• Signal line out - 3.0 Vpp at 10 kohm typical, 2.3 Vpp at 32 ohm typical, 1.7 Vpp at 16 ohm typical

Alarm

• Connector - Clamp (non-isolated closing contact)
• Activation resistance - 10 ohm max

Video

• Standards - H.264 MP, H.264 BP+ (ISO/ IEC 14496‑10), M‑JPEG, JPEG
• Data rates - 9.6 kbps to 6 Mbps
• Resolution - Horizontal x vertical PAL/NTSC, 4CIF 704 x 576/480 (25/30 ips), CIF 352 x 288/240 (25/30 ips)
• GOP structure - I, IP, IPBB, IBBRBP
• Overall IP delay - 240 ms max
• Frame rate - 1 to 50/60 (PAL/NTSC)

Audio

• Standard G.711 - 300 Hz to 3.4 kHz at 8 kHz sampling rate
• L16 Audio - 300 Hz to 6.4 kHz at 16 kHz sampling rate
• Signal-to-noise ratio - > 50 dB

Network

• Ethernet - 10/100 Base-T, auto-sensing, half/full duplex, RJ45
• Protocols - RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP, SNMP, RTSP, 802.1x, iSCSI, DynDNS, UPnP
• Encryption - TLS 1.0, SSL, AES (license option)

Control

• Software update - Flash ROM, remote programmable
• Configuration - Configuration Manager or Web browser 3 | VIP X1 XF E Single-channel Video Encoder

Connections

• SD card interface - 1 x SD card

Mechanical

• Dimensions (H x W x D) - 1.42 x 3.46 x 4.65 in
• Weight - 0.55 lb

Environmental

• Operating temperature - +32 °F to +140 °F
• Relative humidity - 0 to 95% atmospheric humidity, noncondensing
• Thermal value - 13 BTU/h max