ENTRADA2DMK Altronix IP Access FACP Adapter

These adapters are specifically designed to interface with Network Door Controllers. They route power (PoE/PoE+) from a PoE switch or Midspan to the Network Door Controller and accommodate up to two (2) Fail-Secure strikes or Fail-Safe mag locks. The receiver features a supervised Fire Alarm Disconnect which releases locking devices while maintaining power to the Network Door Controller. The Fire Alarm Interface feature allows multiple units to be interconnected enabling any or all to be affected from a single FACP trigger input.

Specifications

Input

• For UL60950-1 - UL Listed Endspan/Midspan LPS limited power source.
• For UL294 - UL Listed PoE/PoE+ (IEEE 802.3af/at) Midspan/Endspan.

Power Output

• Both lock outputs are selectable for either 12VDC or 24VDC and rated @ 8W (12V/667mA, 24V/333mA) each maximum (16W combined).
• Total power rated @ 30W (PoE and lock power).

Trigger Input

• 12VDC-24VDC shutdown trigger (Receiver).
• Two (2) independent 12VDC-24VDC access control trigger inputs (Transmitter).

Ethernet

• Connectivity -RJ45, auto-crossover.
• Wire type -4-pair CAT5 or better structured cable.
• Speed -10/100BaseT, half/full duplex, auto negotiation.
• Distance -up to 100m.

Indicators (LED)

• Output to Entrada2DMT RJ45 connector
  • Green - Remote Aux. OFF
  • Yellow - N/A.
• Midspan/Endspan Input RJ45 connector
  • Yellow - PoE UP
  • Green - N/A.

• Network Door Controller RJ45 connector
  • Yellow - Output 1 ON
  • Green - Output 2 ON.
• Input from Entrada2DMR RJ45 connector
  • Green - PoE Output ON
  • Yellow - PoE Input ON.

Agency Listings

• UL/cUL - UL60950-1 (Information Technology Equipment).
• UL - UL294 (Access Control System Units)
• CE - European Conformity

Physical and Environmental

• Dimensions (H x W x D) - 3.5" x 3.5" x 1" (88.89mm x 88.89mm x 25.4mm).
• Product Weight - 0.45 lbs. (0.2 kg).
• Shipping Weight - 0.8 lbs. (0.36 kg).
• Operating Temperature
  • Entrada2DMR - 0°C to 50°C (32°F to 122°F).
  • Entrada2DMT - For 16W output - -20ºC to 50ºC (-4ºF to 122ºF), For 14W output - -20ºC to 55ºC (-4ºF to 131ºF).
• Storage Temperature - -20°C to 75°C (-4°F to 167°F).
• Relative Humidity - 85% +/-5%.
• Operating Altitude - -304.8 to 2,000m.

ENTRADA2DMK Specifications PDF

ENTRADA2DMK Installation Manual