NETWAY1DWPM Altronix Outdoor Managed Single Port Hi-PoE Midspan Injector

NetWay1DWPM is an outdoor managed single port midspan injector that provides Hi-PoE (60W), PoE+ (30W), and PoE (15W). It includes built-in IP management which facilitates remote device reset/control and status monitoring. The unit is ideal for use with outdoor IP cameras and PTZs, WiMAX modems and WLAN access points. NetWay1DWPM features a lightweight NEMA 4/4X IP66-11 rated enclosure that can be wall or pole mounted. The unit operates at 115VAC or 230VAC input.

Specifications

Input

• 115VAC, 60Hz, 1.2 amp or 230VAC, 50/60Hz, 0.75 amp.

Power Output

• Maximum power - Hi-PoE (60W).Power product using all 4 pairs on 60W
• IEEE 802.3at (30W), IEEE 802.3af (15W) compliant
• Integral surge protection.

Ethernet

• Connectivity - RJ45.
• Wire type - 4-pair CAT5e or higher cable.
• Distance - up to 100m.
• Speed - 10/100/1000mbps, half/full duplex, auto negotiation.

Applications

• Provides PoE/PoE+ and Hi-PoE for cameras/devices.
• Auto detection and protection of legacy non-PoE cameras/devices.

Electrical

• Operating Temperature -
• 30W - 22ºF to 158ºF (-30ºC to +70ºC).
• 60W - 22ºF to 131ºF (-30ºC to +55ºC).
• Storage Temperature - 22ºF to 185ºF (-30ºC to +85ºC) Storage.
• Humidity -20 to 85%, non-condensing.
• System AC input VA requirements -
  • 115VAC -138VA.
  • 230VAC -172.5VA.

Features

• Port status LEDs.
• Unit is complete with a weatherproof enclosure

Mechanical

• Unit can be shelf mounted.
• NEMA 4/4X, IP66-11 Rated enclosure for outdoor use.
• Lightweight molded fiberglass reinforced polyester enclosure is corrosion resistant, non-conductive and does not contain halogens.
• Lockable stainless steel latch.
• Integral flanges simplify wall or pole mounting.
• Enclosure Dimensions (H x W x D approx.) - 9.32” x 7.32” x 4.92” (236.7mm x 185.9mm x 125mm)
• Product weight (approx.) - 2.2 lbs. (1.0 kg).
• Shipping weight (approx.) - 3.2 lbs. (1.45 kg).

NETWAY1DWPM Specifications PDF

NETWAY1DWPM Installation Manual