PGW PulseWorx Gateway Interface

The new PulseWorx Gateway is the ultimate interface to PulseWorx systems. The PGW empowers the use of mobile devices, smart phones and/or tablets, to control the full line of PulseWorx/UPB System products and will also communicate to all UPB licensee products.
The free mobile applications are graphically orientated and optimized to remotely control and check the status of UPB devices seamlessly. Virtual PulseWorx keypads allow end-users to remotely “push” buttons as if they were using their existing keypads to control scenes as well as the ability to operate individual devices. Applications for Apple iPhone, iPad, and the Microsoft Surface Pro will be available, Android applications are in development.
Offering an astronomical timer, every PulseWorx Gateway has the capability to schedule 256 events over four different time schedules. Scheduling can be done on a 7-day weekly basis or 5-year calendar basis. Calendar scheduling is ideal for different holiday and vacation schedules and is appropriate for “lite” commercial installations. Creating, viewing or remotely modifying any programmed schedule is accessible through the mobile applications as well as UPStart configuration software.
A new “connection catalog” will now allow installers supporting multiple installations to easily select from a list of remote locations and connect to the Gateway, implement, and test any modifications the user has requested. The firmware can also be updated remotely.
One of the unique elements of the PWG is that it autonomously maintains status of all devices to allow quick status sync for application clients and controls all connections directly at the installation site without ever accessing any type of cloud server. PCS stands ready to assist 3rd party developers with a fully documented interface for transparent integration with other control applications to communicate to UPB devices.

Specifications

ELECTRICAL

• Power Requirements-Primary: 120 Volts AC, 50/60Hz
• Transmission Channels-256 individual timed events over 4 schedules
• Standby Power Consumption ->.8 Watts
• Connections/Power Wire-3-pin grounded outlet
• Network Connection
  • RJ45 Connector
  • 100/10 Mbp Ehernet protocol
  • Adheres to TCP,DHCP and HTTP standards
• TCP Port- 2101
• Telnet Port- 2001
• Secure TCP Port- 2601
• Baud Rate- 4800
• Data Bits- 8
• Parity- None
• Stop Bits- 1
• Flow Control- None
• Environmental Conditions
  • Indoor Use Only
  • Temperature: -40° to 194°F (-40° to 90°C)
  • Humidity: 10% to 90% RH (non-condensing)

OPERATION

• UPStart-Must have Version 8.0 Build 1 or higher
• Status LED Modes
  • Blue = Power applied / No message traffic
  • Magenta = UPB message received
  • Red = UPB message transmitted
• During Power outage- Retains all settings in Non-volatile EERPOM
• Factory Default -
  • Tap Program button 5 times, LED will flash BLUE
  • Tap Program button 10 times, LED will flash RED
  • Tap Program button 2 times, LED will turn BLUE

MECHANICAL

• Mounting-3-pin grounded outlet
• Dimensions-Height: 4.00 in Width: 2.0 in Depth: 1.25 in
• Weight-9.6 oz.
• Warranty-5 years