PACE1ST Altronix IP and PoE+ Over Extended Distance CAT5e - mini Transceiver

Pace1ST is a long range Ethernet transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100mbps full duplex and power via Cat5e or higher cable in a PoE(+) compliant format. The Pace1ST will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. The receiver passes the PoE(+) compliant power over the cable to the Pace1ST transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m.

Specifications

Input

• Powered by Pace receiver.

Ethernet

• Connectivity - RJ45, auto-crossover.
• Wire type - 4-pair Cat-5 or a single twisted pair UTP.
• Distance - CAT5e - up to 500m.
• UTP (paired with Pace1PRM only) - up to 152m.
• Throughput is rated to pass 100Mbps of data.
• With proper headend equipment multiple Megapixel cameras can be used.
• Speed - 10/100BaseT, half/full duplex, auto negotiation.

Indicators (LED)

• Green LED - PoE ON.
• Yellow and Green LED (by RJ45 jack) - IP Link status, 10/100Base-T/active.

Agency Listings

• UL/cUL - UL60950-1 (Information Technology Equipment).
• CE - European Conformity
• C-Tick compliant.

Physical and Environmental

• Dimensions (W x L x H) - 2.27” x 2.645” x 1.12” (57.7mm x 67.2mm x 28.4mm).
• Product Weight - 0.22 lbs. (0.1 kg).
• Shipping Weight - 0.4 lbs. (0.18 kg).
• Operating Temperature - 15W: -40°C to 75°C (-- 40°F to 167°F), 30W: -40°C to 49°C (-- 40°F to 120°F)
• Storage Temperature - -40ºC to 75ºC (-40º to 167ºF).
• Relative Humidity - 85% +/-5%.
• Operating Altitude - -304.8 to 2,000m

PACE1ST Specifications PDF